DTEC DC30FH Digital Coating/Painting Thickness Gauge,Large Measuring Rang:0-10000um,with Data Pro Software,

DC30FH Coating Thickness Gauge one of the three models of DC30 series coating thickness gauge, which equips with high class ferrous probe F10,which can measure the coating up to 10000μm, adopting magnetic measuring method to measure the thickness of non-magnetic coatings on magnetic metal substrates. Such coatings including paint,plastic film,chromium layer,copper layer, zinc coating, enamel etc. 
It is widely used in electronics, power plants, petrochemical industry, aviation, architecture etc.


Using Scopes:

With ferrous probe, it is used to measure non-magnetic coatings on magnetic metal substrates.

• Common non-magnetic coatings:

Painting coating(oil paint, painting, powder spraying), plastic film,rubber layer,erosion resistant coating,synthetic material layer,chromium layer,copper layer, lead layer, aluminum layer, tin layer, cadmium layer, zinc coating, enamel etc..

• Common magnetic metal substrates:

Steel, iron base alloys, cobalt, nickel etc..



Measuring principle of DC30 Series:

• Magnetic Method (Fe): Measuring the thickness of non- magnetic coatings on steel, iron and other ferromagnetic metal substrates, e.g. painting, varieties of anti-corrosion coating, powder spraying, plastic, rubber, synthetic material, phosphate coating, chromium, zinc, Aluminum, tin and cadmium, etc.
• Eddy Current Method (NFe): measuring the thickness of non-conductive coatings on copper, aluminum, stainless steel and other non-ferromagnetic substrates, e.g. painting, varieties of anti-corrosion coating, powder spraying, plastic, rubber, synthetic material, oxide film and phosphate film, etc.

• Large measuring range of ferrous probe:0-10000μm;

• Standard data processing software and USB cable, enable to connect to PC for further data analysis and data print;

• Multiple statistics function: Measuring Times, Max, Min, Average, and Standard Deviation;

• High Contrast Segment Liquid Crystal Display (LED Backlight);

• Suitable for both One-Point Calibration and Two-Point Calibration;

• Auto off after 3 minutes of inactivity to save power;

• Excellent after-sale service system for high quality products. Easy to buy and convenient to use.

  Standard Packing List:

• F1 Probe:

• N1 Probe:

• F10 Probe:

• Data Pro Sfoftware and Cable:

• Plastic Calibration Foils:

• Ceramic Calibration Foils:

• Fe Zero Plate:

• Al Zero Plate:

• DC30 Series Instrument Case:

Every set of our equipement will be carefully tested and double checked steps by steps before being packed and delivery,as we all know that among such fierce international competition,only 100% good quality and stable performance can finally attain the customer's trust.Hence,we will always put the equipment calibraton job in the first place while manufacturing.