Contact Platform Support
Help CenterHeating Furnace
Related Products
-
Industrial FurnacesUS$ 100,000 - 200,000MOQ: 1 Set -
Direct-heating FurnaceUS$ 100,000 - 200,000MOQ: 1 Set
-
Chain Grate Hot Air Furnace With High EfficiencyUS$ 9,999 - 99,999MOQ: 1 Set
-
High Quality Cheap Chain Grate Hot Air Furnace Made in ChinaUS$ 9,999 - 99,999MOQ: 1 Set
-
Hot Air Circulation Oven China SupplierUS$ 9,999 - 99,999MOQ: 1 Set
Specifications
industrial furnaceDirect-heating Furnace
industrial furnaces
heating furnace
heating source
The heating furnace, is mainly made of three parts, i.e. furnace hearth, setting pocket and mixing room. The temperature is very high in the space between the setting pocket and the mixing room, to make the volatile combustible air burn sufficiently. The fuel is filled in by the furnace door, which forms burning layers on the grate. The air needed for combustion enters from the ashpit, through the grate and burning layers to make fuel burn sufficiently. Ash slags drop into the ashbin and discharged out of the ashpit. The combustion products (flue gas) in the chamber, through burning room, devided into ash and fire sparks by the setting pocket, then enters the mixing room, and pressed into the hot air room of the dryer after have been mixed with cold air to reach the temperature required. Auxiliary air gets preheated and enters the chamber to make the unburnt volatile and small carbon granules burn further.
In order that the slags and sparks are not carried away by cold air, the cold air inlet is set behind the setting pocket and spark quenching device and higher than setting pocket.
When fire is made in the chamber, the coal smoke produced enters the chimney by the passage and exhaust into the space. At the same time, when the dryer closes down or goes wrong, the flue gas can also be led out from the chimney.
The temperature of the hot air can be adjusted by cold air door or hot air door.
Direct-heating furnace Specification
Model |
Temp. |
Fan model |
Weight |
Coal consumption (kg/t/h) |
Heat value (Kcal) |
1.3*1.5m |
600-800 |
Y5-47-7c |
7.5t |
15 |
1,000,000-1,200,000 |
1.2*1.4m |
500-650 |
Y5-47-6c |
7t |
15 |
800,000-1,000,000 |
1.0*1.2m |
400-500 |
Y5-47-6c |
6t |
15 |
700,000-800,000 |
0.8*1.0m |
300-400 |
Y5-47-5c |
5t |
15 |
600,000 |
Send Inquiry to This Supplier
You May Also Like
-
FurnaceNegotiableMOQ: 2400 Sets
-
New High Quality Electric Induction Melting Industrial Melting FurnaceUS$ 5520.00MOQ: 1 Set
-
China Plastic Melting Vacuum FurnaceNegotiableMOQ: 1
-
Top Quality Stainless Steel Charcoal KilnUS$ 2,000 - 3,500MOQ: 1 Set
-
2 Hours Replied BX-5-12 Heat Treatment MuffleUS$ 535 - 640MOQ: 1 Piece
-
Foundry EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
Annealing Temperature Sensor Stick - Industrial Supply/THERMO CRAYON/From 40 to 1070 Deg.CUS$ 1,000 - 2,000MOQ: 5 Pieces
-
SELON SED-8S2 INFRARED INTELLIGENT DIGEST STOVE, RESISTANCE TO ACID ALKALI SPECIAL HOSE, USA MICROPUMPUS$ 1,225 - 1,307MOQ: 1 Set
-
Coal Combustion Hot Air Furnace Used in Grain ProcessingUS$ 230,000 - 890,000MOQ: 1 Set
-
Our Equipment 80 MT Ladle Refining Furnace for Secondary SteelmakingUS$ 1,500 - 6,000MOQ: 1 Metric Ton
