XLPE Insulated Electrical Cable Specifications
Specifications
XLPE Insulated Electrical Cable Specificationsnductor:copper
2.insulation:xlpe
3.voltage:low
4.good service
XLPE Insulated Electrical Cable Specifications
YJV 0.6/1KV 4X120 CABLE electric cable
No. of Cores: 4
Rated voltage: 0.6/1kv
Norminal thickness of insulation: 1.2mm
Approx. overall diameter: 38.4mm
Max cable weight: 4883.2kg/km
Nominal cross sectional area of conductor: 1.5~400mm2
YJV 0.6/1KV 4X120 CABLE electric cable
For XLPE insulated power cable ,either chemical method or physical method is employer to transform the molecular structure of PE form chain into three-dimensional network, i.e. thermoplastic PE is transformer into thermosetting XLPE. After cross-linking, the thermal and mechanical properties of PE have been greatly improved while its excellent property are still retained.
The maximum permissible operating temperature of the conductor of a XLPE insulated power cable is 90 which is higher than that of paper, PVC or PE insulated power cable. The cable has the advantage of simplicity in construction, lightness in weight, convenience in application besides its excellent electrical, thermal ,mechanical and anti-chemical corrosion properties. It can also be laid with no limitation of level difference along the route.
Standard
The product is manufactured according to the standard of GB12706 or IEC,BS,DIN and ICEA upon request.
Applications
The product is suitable for use in power transmission and distribution lines with rated power frequency voltage 3.6/kV-26/35kV
Operating characteristics
1, Rated power-frequency voltage Uo/U : 3.6/kV-26/35kV
2,Max.permissible continuous operating temperature of conductor: 90
3,Max.short-circuit temperature of conductor shall not exceed 250.(5s maximum duration ).
4,The ambient temperature under installation should not below 0
5, The bending radius of a single-core cable should not less than 20 times of the cable diameter. The bending radius of a three-core cable should not less than 15 times of the cable diameter.
Voltage designation
The rated voltage of the cable for a given application shall be suitable for the operating conditions in the system in which the cable is used , and is expressed in the form of Uo/U (Um)KV .Where :
Uo-The rated power-frequency voltage between conductor and earth or metallic scieen ,for which the cable designed;
U-The rated power-frequency voltage between conductors, for which the cable designed;
Um-The maximum value of the highest system voltagefor which the equipment may be used.
Send Inquiry to This Supplier
You May Also Like
-
Sick YF8U14-050VA3XLEAX - Sensor/actuator CableNegotiableMOQ: 1 Piece
-
Energy Saving High Temperature Self-Regulating Heat Trace Cable for Industrial ApplicationsUS$ 1.4 - 2.4MOQ: 1 Meter
-
Electrical wire Core Ul Pvc ElectricalUS$ 1 - 10000MOQ: 1 Piece
-
Fireproof CableNegotiableMOQ: 500 Meters
-
Pesticide Spraying Machine Wire Harnrss Tractors and Agricultural Machinery Cable AssemblyNegotiableMOQ: 1 Unit
-
Hot Sale Magnet Polyesterimide Flat Enamelled Super Aluminum WireUS$ 4.89MOQ: 500 Kilograms
-
4/8/16/32CH Channels Multi Cable With Wheel/6 UTP Multipair CableUS$ 500 - 800MOQ: 10 Pieces
-
Advanced Self-Regulating Heating Cable for Freeze Protection & Temperature MaintenanceUS$ 0.98MOQ: 10 Meters
-
Sports and Gym Equipment Silicone Grip Pipe Wrapping TapeNegotiableMOQ: 1 Roll
-
Electric Wire CableNegotiableMOQ: 2700 Meters