Contact Platform Support
Help CenterBante902 Economical PH/Conductivity Meter (CE Certificate)
Related Products
-
Bante904 Multifunction Conductivity/TDS/Salinity/Resistivity/DO Meter (CE Certificate)US$ 500 - 550MOQ: 1 Set -
SALscan10 Pocket Salinity Meter | Pocket Size Salinity TesterUS$ 65 - 85MOQ: 1 Set
-
SALscan20 Pen Type Salinity Meter | Waterproof Salinity MeterUS$ 65 - 80MOQ: 1 Set
-
ECscan40 Pocket Salinity Tester | Conductivity/TDS/Salinity TesterUS$ 75 - 85MOQ: 1 Set
-
Bante531 Portable Salinity Meter | Conductivity/Salinity MeterUS$ 210 - 230MOQ: 1 Set
Bante902 Economical pH/Conductivity Meter
Economical pH conductivity meter includes 12 optional parameters, the meter is suitable for
measuring the pH, ORP, Conductivity, TDS, Salinity and Resistivity of the liquids.
Bante902 Economical pH/Conductivity Meter - Features:
pH Mode:
• High accuracy benchtop pH conductivity meter is equipped with a large backlit LCD display.
• 1 to 5 points push-button calibration with auto-buffer recognition.
• Selectable pH buffer standards (USA/NIST/DIN) or using the custom calibration solutions.
• Automatic electrode slope display helps user decide whether to replace sensor.
ORP Mode:
• Single point offset calibration allows adjusting the displayed value to a known standard.
• Relative and absolute millivolt measurement modes provide accurate ORP readings.
Conductivity/TDS/Salinity/Resistivity Mode:
• 1 to 5 points push-button calibration with automatic calibration solution recognition.
• Selectable cell constants (0.1/1/10), normalization temperatures (20/25°C), TDS conversion
factors, seawater and practical salinity measurement modes.
• Linear or pure water compensation improves measurement accuracy of meter.
Other Features:
• Automatic Temperature Compensation provides accurate reading over the entire range.
• Calibration Due Reminder prompts user to calibrate the meter regularly.
• Stability indicator automatically shows current measurement status.
• Auto-Hold function freezes stable measured value for easy viewing and recording.
• Manual temperature calibration corrects temperature deviation.
• Selectable temperature unit (°C or °F) meets different application requirements.
• Automatic electrode diagnosis shows zero point offset and slope of the electrode.
• Help message as a operational guide that helps you quickly begin using the meter.
• System menu allows setting the 12 parameters, including the calibration points, resolutions,
stability conditions, measurement units, etc.
• Reset feature automatically resumes all parameters back to factory default options.
• Expanded memory stores and recalls up to 500 readings.
• Built-in real-time clock stamps stored data to meet GLP standard.
• Stored data can be transferred into computer by USB communication interface.
Bante902 Economical pH/Conductivity Meter - Specifications:
pH:
• Range: -2.000~20.000pH
• Accuracy: ±0.002pH
• Resolution: 0.1, 0.01, 0.001pH
• Calibration Points: 1 to 5 points, USA, NIST, DIN Standards
• Temperature Compensation: 0~100°C, 32~212°F, Manual or Automatic
mV:
• Range: -1999.9~1999.9mV
• Accuracy: ±0.2mV
• Resolution: 0.1, 1mV
• Calibration Points: 1 point (Only for Relative mV mode)
• Calibration Range: ±200mV
Conductivity:
• Range: 0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
• Accuracy: ±0.5% F.S
• Calibration Points: 1 to 5 points
• Calibration Solutions: 10µS/cm, 84µS/cm, 1413µS/cm, 12.88mS/cm, 111.8mS/cm
• Temperature Compensation: 0~100°C, 32~212°F, Manual or Automatic
• Temperature Coefficient: 0.0~10.0%/°C
• Compensation Modes: Linear or Pure Water
• Cell Constant: K=0.1, 1, 10
• Normalization Temperature: 20 or 25°C
TDS:
• Range: 0~10ppt (Max. 20ppt, depending on factor setting)
• Accuracy: ±1% F.S
• TDS Factor: 0.1~1.0 (Default 0.5)
Salinity:
• Range: 0~10ppt (Max. 80ppt)
• Accuracy: ±1% F.S
• Measurement Modes: Seawater or Practical Salinity
Resistivity:
• Range: 0~100MΩ
• Accuracy: ±1% F.S
• Resolution: 0.01, 0.1, 1
Temperature:
• Range: 0~105°C, 32~221°F
• Accuracy: ±0.5°C, ±0.9°F
• Resolution: 0.1°C
• Calibration Points: 1 point
• Calibration Range: Measured value ±10°C
Others:
• Hold Function: Manual or Automatic
• Stability Conditions: Low or High
• Calibration Due: 0 to 31 days
• Power Off: Manual or Automatic (10, 20, 30 minutes)
• Reset Function: Yes
• Memory: Stores up to 500 data sets
• Output: USB Communication Interface
• Power Requirements: DC5V, using AC adapters, 220VAC/50Hz
• Dimensions: 210(L)×188(W)×60(H)mm
• Weight: 1.5Kg
Bante902 Economical pH/Conductivity Meter - Accessories:
• pH Electrode
• Conductivity Electrode
• Temperature Probe
• pH Buffer Solutions (pH4.01/7.00/10.01)
• Calibration Solutions (84µS/cm, 1413µS/cm, 12.88mS/cm)
• USB Cable
• DC5V Power Adapters
Bante Instruments - Professional manufacturer for Economical pH/Conductivity Meter
Send Inquiry to This Supplier
You May Also Like
-
Process Control C 3630 Conductivity Controller With 0-2000mS/cm Range and LCD DisplayNegotiableMOQ: 1 Set
-
Fish Aquaculture Oxygen EquipmentUS$ 999 - 1,111MOQ: 1 Piece
-
Winner3005 Dry Particle Micron Measuring Instruments for Abrasive Powder TestNegotiableMOQ: 1 Set
-
Laser Measurement SensorNegotiableMOQ: 1 Set
-
SELON THERMAL CONDUCTIVITIY METER, DIGITAL PH METER,PH METER DIGITALUS$ 587 - 587MOQ: 1 Piece
-
Whiteness TesterNegotiableMOQ: 1 Unit
-
100% Factory Selling of Garden 2 in 1 Soil ph Test MeterNegotiableMOQ: 500 Pieces
-
Automated Elisa AnalyzerNegotiableMOQ: 1 Piece
-
S60H -- High Quality Diesel Nozzle TesterUS$ 90 - 140MOQ: 1 Set
-
Pressure Calibrator HYDRAULIC DEADWEIGHT TESTERSUS$ 300 - 900MOQ: 1 Piece
