H13/DIN1.2344/4Cr5MoSiV1 hot work tool steel round bar

Specifications

hot work tool steel round bar
H13/DIN1.2344
Forging material,
Annealing,Hardness:180~255HBS,
EAF or ESR black surface

HOT WORK TOOL STEEL ROUND BAR

H13/DIN1.2344 hot work mould steel feature:

1)Comparable steel:H13(USA,ASTM);DHA1(Datong,Japan);4Cr5MoSiV1(China);1.2344(Germany DIN);SKD(Japan,JIS)

2) Chemical composition:

C	Si	Mn	Cr	P	S	Mo	V
0.30~0.40	0.80~1.20	0.20~0.40	4.75~5.50	≤0.025	≤0.025	1.25~1.75	0.80~1.20

3) Delivery condition:EAF or ESR;hot rolled or forging;black,machined surface;Anneling,Hardness:HBS≤229

4) Specification: Round bar:Thickness: 60~350mm, Length:2500~4000mm .

Flat bar:Thickness: 20~300mm,Width: under the size of 205~2200mm,

               Length:2500~4000mm.

5)Material character: Under upper hot initensity and rigidity ;under middle temperature,have good tenacity,hot tirdness nature and definite wearable;empty quenching under lower Ao shi ti temperature condition.small distortion after heat-treatment and so on.

6)Application:Used for making hot squeezing mould,forging mould,embedded lump,like:alloy,cooper and other alloy and other alloy casting mould

7)Ultrasonic test standdards:GB/T6402-1991,CLASS 1

8)Payment terms:30% deposit,T/T or L/C at sight.