High Temp. Structural Glass Silicone Sealant

High Temp. Structural Glass Silicone Sealant

1.  Characteristics:

l  One component, RTV-1, Neutral Curing at room temperature, high strength silicone structural sealant;

l  Excellent weatherproofing performance, shelf life reaches over 30 years in general weather condition;

l  No need to prime coated, excellent joint to most building material;

l  Excellent compatibility with other neutral silicone sealant

2.  Main Purpose:

l  Structural assembling for glass curtain-wall engineering;

l  Can joint glass with metal part to a single assemble part to satisfy with design of full-hided or semi-exposed flame curtain wall;

l  Secondary seal and joint structural insulating glass;

l  Seal in the situation of high sealed security;

3.   Main Technology Data:

4. Application Standard:

GB 16776-2005

5. Specification

Packing:300ml/cartridge; 24cartridge/ctn

590ml/sausage; 20sausage/ctn

Color: black, others of special order

6. Restriction of Usage:

Not compatible with materials with grease or exudation;

Unsuitable for the airproof location, because it requires absorbing moisture in air to cure;

Unsuitable for the frosty or moist surface;

Unsuitable for the continually flooding or entire-year moist places;

Cannot be used on the unclean or unstable substrate;

Cannot be used on the substrate surface under 6℃or above 40℃

Cannot be used on joint which bearing structural strength or places of physical damage.

7. Technology Service

l  We supply integrate data, technical consultation and free compatibility test.

l  Solving problem in the course of using timely

8. Joint Design and Operation Procedure

l  Please see “Operation Instruction to Girafe Silicone Structural Sealant ”

9. Safety

l  Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate;

l  Silicone sealant will not release any harmful substance and not be harmful to health after cured;

l  Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;

10. Warranty

l  As an ISO9001,ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System. We are recognized as manufacturer of silicone structural sealant for construction on August,2006;

l  We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering. 

11. Maintenance

l  Generally there is no need to repair. If the seal joint is damaged, please remove the damaged silicone sealant, clean the surface of substrates, and fill up with silicone sealant.

l  Girafe silicone sealants have good adhesion to cured sealant.

12.Estimated Amount of Use:

Please see following form of estimated amount of various joints:

  The length of Girafe 995 Neutral Structural Sealant 300ml can be extruded during application.

Note: The actual amount of use may be different due to the joint design, installation position of pad material, repairing skill and wastage in application.

Attention:

Information published in this instruction is correct. However, by no means can it be considered an absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.

Related Products: