Strut Channel ,back to back unistrut

Specifications

Strut Channel ,back to back unistrutBack to back channel
Thinckness:15-2.7mm
Material:Low carbon steel

Features:
1) P41series strut channel are manufactured from Q235/Q215 with galvanized finish or epoxy coating.

2) Wall thickness is 2.5mm, standard delivery length is 3m or 6m.

3) Wall thickness can be 2.0mm and 1.5mm for light hanging system, for beam load capacity, use 80% and 60% of appropriate load chart separately.
4) When P41 series are used as beam, multiply uniformly distributed load from the table by 0.5 for concentrated load and corresponding deflection by 0.8.

5)Channels with side ribs, for beam load capacity, use 120% of appropriate load chart separately.

6)Other Size can according to customers' drawings or sample.