12VDC_6 PWM LED dimmer, 1206 PWM LED dimmer/Driver

         Welcome to Hangzhou Singo Tech Co. Ltd

 12VDC_6 PWM LED dimmer, 1206 PWM LED dimmer  

Hi customer, pcba OEM/ODM one-stop service will be started from Hangzhou Singo Tech Co.,LTD. Nice to meet you here.

Kindly review  Introduction Video to know more about us:

http://hzsingo.en.china.cn/company_profile/video_introdution.html 

Instructions & Specifications: PWM Dimmer, 12 Volt, 6A (72W)

This dimmer is designed to operate LED lighting, such as LED Light Strips and other light sources. It has an integral on/off switch and provides precise dimming of light sources.

To install, use the screw terminals and/or attached input and output wires (shaft is 1/4"). Take care to ensure the dimmer does not contact surrounding metal structure or other wiring.

Specifications

Mode of Operation - Continuously variable, pulse width modulation (PWM).

Supply Voltage - 8 to 20VDC working voltage, up to 30VDC momentary.

Output Voltage Range - From zero VDC to supply voltage

Output Current Range - Up to 6A

Ambient Temp Range - minus 40F (-40C) to 115F (46C), with restrictions as noted

DC-DC Conversion Efficiency - About 98% at full rated current, higher at lower current

Load Types - Optimized for resistive loads

Size– 61*37*25(mm)

Weight–20 to 30 gm,

Load Regulation - Generally less than 3% from minimum load to maximum load at all settings

Line Regulation - Directly proportional to supply voltage

Power Dissipation of Drive Circuitry - Less than 0.038W. No load current draw is about 1mA. Nil current used if on/off switch is in Off position.

Accessories - Knob,

Wiring Diagrams