Selco M4200-0010 Alarm Indicator
Alarm Indicator
Model: M4200-0010
Maker: Selco
Input : 8-60 VOLT
The M4200 Alarm Monitor provides a cost effective solution, with the possibility of monitoring eight individual sensors. The inputs can accept NO or NC contacts. Each input can be programmed to control both of the two alarm relays for group alarm outputs. All inputs will, in default mode, activate the alarm relay and the siren relay. The delays for the inputs can be individually selected between 25 milliseconds and 999 seconds.
Cable monitoring provides extra security to the alarm system. It is possible to adjust the brightness and color of the LEDs. Configuration can be done either by dip switches on the back of the unit or by PC.
Send Inquiry to This Supplier
You May Also Like
-
Dry Transformer With Mill Test Report for 440V to 220V Three-Phase Conversion SG-TypeUS$ 150 - 1500MOQ: 10 Units
-
Electronic CapacitorNegotiableMOQ: 2000 Pieces
-
6\"/8\" FramesNegotiableMOQ: 500 Pieces
-
Oven Capacitor CH85 2100VAC Capacitor for MicrowaveNegotiableMOQ: 1
-
20kA Surge Protective Device SPD (SP-D10)US$ 0.01 - 0.02MOQ: 1 Piece
-
IRFP450,100% New and Original. Top Sales!!!NegotiableMOQ: 100 Pieces
-
Miniature Capacitor 2.7v1f 6.3x9mm Super CapacitorUS$ 0.35 - 0.5MOQ: 100 Pieces
-
50V 10UF CapacitorUS$ 0.5 - 1MOQ: 200 Pieces
-
BNCHG Terminal Block Pin Connector for Over 12 Year ExperienceUS$ 0.35 - 0.4MOQ: 10000 Sets
-
Bimetal Thermal Switch 250V 5A-25ANegotiableMOQ: 1000 Pieces
