Gas Appliance whole machine life tester

1.  It is designed according to the standard requirements of GB164101.

2.  The movements structure of the test are all using the Pneumatic Components, Straight cylinder  and Rotating Cylinder seperately achieve the whole process of Pressure Knob , Rotating ignition, Loosen the knobs, conflagration burning, re-rotating to transfer to small fire burning and the  whirling restoration.

3.  The time of each steps is adjustable , and can set the number of cycles and showed cycle.  

4.  In the test process, also can according to the conditions of the tested products and  to go on the test of the ignition device at the same time, through access test to record the number of ignition.      

5.  In the process of the test, can according to the circumstances of the tested sample, and provide solenoid valve adjustable power,to make the solenoid valve opened and closed equipment simultaneously, and to record the number of open and closed.

Technical characteristics

6.  The gas source: 4~6kg/cm2

7.  Simulate the put though time and the cut off time of the flame: 0~99S±0.1S (adjustable) 

8.  The test pulse of the whole machine: 2-20 times/min (or customized)

9.  Ignition time and pulse: 0~30S±0.1S 0.5~20 times/min

10.  The power of the solenoid valve: open and closed the solenoid valve: DC1.5V/3V/24Vopen and closed

11.  Current: can adjustable from 0 to 500mA

12.  Journey: 5~40mm,

13.  The turning angle: 0~180o   The count range: 1~99999 (can preset)

14.  The test station: 1-2 entries. (Optional)

15.  The appearance size:( length×depth×height) 1600×600×800mm