Contact Platform Support
Help Center2013 the Advanced Biomass Gas Furnace With ISO 9001
Related Products
-
2013 the Latest Environmental Protection Small Biomass GasifierUS$ 3,333 - 66,666MOQ: 1 Set -
2013 New Coal Gas GasifierUS$ 3,333 - 66,666MOQ: 1 Set
-
2014 Satisfying Quality Crusher Plate With ISO9001 CertificationUS$ 8 - 500MOQ: 1 Set
-
Satisfying Performance Crusher PlateNegotiableMOQ: 1 Set
-
High Quality Crusher Spare PartsUS$ 88 - 8,888MOQ: 1 Set
Specifications
Energy saving;Envrionmental protection;
High efficient;
Automatic and easy maintance;
High heating effiency;
biomass pellet burner concept biomass pellet burner, wood pellets as a biofuel. biomass pellet combustion characteristics of biomass burner
1, the use of fuel: wood pellet biomass fuel;
2, complete combustion efficiency high: Boiling half gasification combustion the Gache line with wind swirl design, make fuel and complete combustion, the combustion efficiency of up to 90% or more;
Complete combustion stability: the equipment to run the state of the micro-pressure non-occurrence the tempering and off fire phenomenon;
4, wide adjustment range of the heat load: heat load of the burner can be adjusted in the range of 30% -120% of the rated load quickly, starting block responsive;
5, non-polluting environmental benefits are obvious: as fuel to renewable biomass energy, to achieve the sustainable use of energy. Staged combustion technology using low temperature, low flue gas nitrogen oxide, sulfur dioxide, dust and other emissions, coal stove best alternatives;
6, no tar, wastewater and other waste emissions: the high temperature gas combustion technology, tar direct combustion in gaseous form, to solve the technical problems of high biomass gasification tar content, avoid washing tar water quality secondary pollution;
7, simple operation, easy maintenance: automatic feeding, the wind ash handling, operation is simple, small workload single person on duty can;
8, investment, low operating costs: biomass burning structure design is reasonable for the transformation of low-cost variety of boilers.
Edit this paragraph applies to the range of biomass particles combustion machines are widely used in the boiler, die-casting machine, industrial furnaces, incinerators, smelting furnace, kitchen equipment, drying equipment, food drying equipment, ironing equipment, painting equipment, highway road construction machinery equipment, industrial furnace, asphalt heating equipment and other energy industries.
Edit this section various fuel 200,000 kcal (per hour) run cost analysis of the table fuels Name electrical (kwh) liquefied natural gas (m³) diesel (kg) (kg) of biomass particles (kg)
Calorific value (Kcal) 860 8500 1030 0 11000 4500
Fuel price ($) 1.0 5.0 6.8 7.5 1.3
Hourly energy consumption 232.6 (kwh) 23.5 (m³) 19.4 (kg) 18 (kg) 44.4 (kg / h)
Hourly cost of 232.6 yuan / h 117.6 yuan / h 132 / h 135 yuan / h 57.7 / h
Edit this paragraph Jinding Xin biomass pellet burner safe operation guidance in order to ensure the safety of biomass burning machine, normal operation, you need to be operated in accordance with the method of operation as follows:
A boot manager:
1, before the start of the combustion engine, clean up the furnace bridge coke, clean up the bottom of the furnace coke, add pellet fuel, close the material tank cap open every valve;
2, open the equipment power, check circuit is normal, plumbing, check the cooling pond whether enough water. Turn on the burner cooling water inlet and outlet valve, and confirm that the high temperature combustion chamber the Mezzanine cooling water column full;
3, the supply air stalls to small, put the right amount of bottom material, officially the ignition to start, proper air supply light to open the door, close the door and start feeding system, and gradually adjusted plus blower stalls to the right amount. Feeding speed and air volume should gradually increase, not accelerate too fast, there should be 2-3 minutes, so that the normal furnace temperature rise.
Second, operation and management:
1, feeding deep-frozen 30-80 conventional dosage fastest over 100 speed, can not be less than 20 running slowest air volume configuration in the high-end bit; ventilated feeding speed of the production line of heat transfer system may be appropriate to speed up the amount of wind can be equipped with the highest gear, but it should at any time observing the chimney exhaust, no soot emission standard for determining the feeding speed;
2, not timing observations of changes in water temperature, adjust the displacement, do security, savings;
3, according to the law of the user raw materials consumption appropriate add fuel to ensure the normal operation of the equipment;
4, according to the product energy consumption, adjusted for changes in the insulation stage intermittent feed speed;
Furnace combustion, non-open next door.
Third, shutdown management
15 minutes early to stop feeding the fan to keep running. (On the control panel has been set) Close every valve;
2, the power is turned off, stopping fan, light open top and bottom door, keep the right amount of natural wind to minimize furnace coke.
IV Special Note
1, the fuel must be used c6-8mm pure sawdust biomass particles, do not use too much particulate debris and magazines pellet fuel. Feeding to prevent iron sword into the bins! Since the fuel is too poor or iron objects into bins cause equipment damage will not be covered by warranty;
2, boilers or other equipment used in the furnace is best negative pressure, non-positive pressure is too large. If the positive pressure is too large, should install cited wind equipment;
3, the runtime must close the feed cover to prevent squandering. Shutdown must close every valve to prevent tempering;
4, the resistive material and card material phenomenon (usually due particles too long) with a wooden stick to poke Never use wire, steel bar, prevent embroiled screw, resulting in screw damage;
5 decoking fire mouth: the burner work after a period of time, in the vicinity of the fire-breathing mouth to produce coke. If this phenomenon occurs, will seriously affect the operation of the burner. Will cause serious damage to the burner! Therefore require regular inspection and decoking. Check again (recommended 3-7 days).
Decoking: dismantle the burner out of the use of equipment, to beat Coke blocks from the fire at the mouth gently with a wooden stick or iron bar, make it out of the gasification indoor bile. (Note decoking not hurt gasification indoor lamps and excesses channel) coking and fuel, recommends using pure woodfuel)
V. General Troubleshooting
1, chimney smoke emission - reason: Feeding too much, can not digest the furnace. Approach: stop feeding for a few minutes to observe the the chimney exhaust after start normal feeding; reduce feeding speed, chimney smoke emissions prevail;
Furnace mouth Mars rebound - reasons: the use of equipment systems slag accumulation a poor exhaust or carbon deposits clogging of burner fire mouth. Approach: clean up and clear production lines turn heat systems slag accumulation or clean-burning machine fire mouth slag accumulation. Equipment furnace or pipes generally 8 hours / workday case turned hot the system product residue to clean up and clear the time for 3 months;
Edit this paragraph calorific value of raw material and hot water boiler table Model
50,000 kcal CLHS0.06-M.
70,000 kcal CLHS0.08-M.
100,000 kcal CLHS0.12-M.
150,000 kcal CLHS0.18-M.
200,000 kcal CLHS0.24-M.
300,000 kcal CLHS0.35-M.
400,000 kcal CLHS0.48-M.
500,000 kcal CLHS0.6-M.
600,000 kcal CLHS0.7-M.
900,000 kcal CLHS1.05-M.
Edit this paragraph
Case: drying tunnel (30 m long, 1.6 m wide, the upper 2 meters), the drying time is probably about 30 minutes (depending on the product to be);
The working time is 11 hours, the temperature at 90 degrees, the daily energy consumption 75kg-100kg biological particulate fuel, and fuel consumption daily 100-130 yuan. Blower, fan and heat exchanger circulation fan day electricity at 25 degrees or so, the cost is 25 yuan.
Bauhaus anticorrosive drying tunnel day running costs 155 yuan. 30 days per month, year by 10 months of work time to calculate the annual cost of about 46,500 yuan.
Send Inquiry to This Supplier
You May Also Like
-
China Factory Wholesale 500KW Industrial Electric Silent Power Diesel GeneratorNegotiableMOQ: 1 Set
-
Small Feed Pellet Machine Sawdust Briquette Machine Sawdust Pellet Production Equipment LineUS$ 690 - 3880MOQ: 1 Set
-
Humic Acid Fertilizer Pellet Machine(CE)US$ 880 - 99,000MOQ: 1 Set
-
Compress Wood Pellet Mill/Flat Die Wood Pellet Machine/Wood Pellet Hammer MillUS$ 4,600 - 5,000MOQ: 1 Set
-
ZLG850 Wood Pellet Making Machine/Biomass Pellet MillUS$ 500 - 10,000MOQ: 1 Set
-
Paddy Rice Husk Briquette MachineUS$ 2,000 - 3,000MOQ: 1 Set
-
Factory Direct Supply Flat Die Diesel Small Pellet PressUS$ 500 - 1,000MOQ: 1 Set
-
Industrial Complete Flat Die Wood Pellet Production LineUS$ 20,000 - 25,000MOQ: 1 Set
-
Factory Directly Wood Pellet Press, Wood Pellet Press Machine, Gemco Supply Wood Pellet MillUS$ 3,000 - 4,000MOQ: 1 Set
-
High Output and Low Consumption Wood Waste Charcoal Briquette MachineNegotiableMOQ: 1 Set
