Contact Platform Support
Help Center10/100base-TX/FX SNMP WEB Telnet Management Media Converter
Related Products
-
10/100 Base Single Fiber Single Mode Media Converter With ManagmentUS$ 1 - 105MOQ: 1 Piece -
2 Fiber Ports 3 RJ45 Ethernet Ports Ring Type 10/100Base Media ConverterUS$ 1 - 79MOQ: 1 Piece
-
Ring Type 3TX Ports 2FX Ports 10/100Base Fiber Media ConverterUS$ 1 - 80MOQ: 1 Pair
-
2 Fiber Ports 3 Ports 10/100Mbps Ring Type Fiber Media ConverterUS$ 1 - 150MOQ: 1 Pair
-
100Mbps 2FX 3TX Fiber Optic Media Converter Price Very Good and CheapUS$ 0.1 - 74MOQ: 1 Pair
10/100base-TX/FX SNMP WEB Telnet Management Media Converter
FC830AM Managed Media Converter
Overview
HiOSO FC830AM Series belongs to 10/100M auto-adapted Fast Ethernet Fiber Media Converter (Or called Photo-electrical Conversion) with management function, which supports SNMP Protocol,Web windows administration, remote Telnet management, Com port management and software upgrade. It can supervise the working condition and configure the mode of each local media converter in the slot and remote media converter connected to the other side.
10/100M Ethernet Fiber Converter is fully in compliance with 10Base-T, 100Base-TX, 100Base-Fx and IEEE 802.3x International Standard etc. It can completely be cooperated with Network Card, Repeaters, HUB and SWITCH etc made by other suppliers, and also provide cost-efficient hardware support to the information transmission of Broad-Band private network and Fiber Optical citywide LAN.
Feature
l Supports SNMP management, Web address management and Telnet management
l Enable/Disable optical link-loss alarm function
l Four transmission modes supported
l Comply with IEEE 802.3μ 100BASE-FX/TX, IEEE802.3 10BASE-T standard
l Comply with IEEE 802.1Q VLAN protocol
l Support 10/100M, Full/Half duplex auto-negotiation
l Support MDI/MDIX auto sense
l Support transmission distance of up to 120km (Dual-fiber)
l Support over-size packets of up to 1912 Byte
l Support hot-swapable
l The cards work as standalone and rack-based Media Converters
l Single-fiber and dual-fiber devices are available
Technical Data
- Mechanical Parameters -
Size |
32mm(H)x 165mm(W)x 128mm(D) |
Operating temperature |
-10~+55℃ |
Storage temperature |
-40~+70℃ |
Power supply |
AC220V / DC-48V |
- Optical Parameters -
Multimode Fiber: 62.5/125, 50/125, 100/140μm | |
MM2km or MM5km |
Output power: -20~-18dBm |
Receiving sensitivity: <-31dBm | |
Distance: 0~2km or 0~5km | |
Connector: SC(standard)/FC(optional) /ST(optional) | |
Type: dual-fiber | |
Wavelength: 850nm/1310nm | |
Single-mode Fiber: 9/125, 8.3/125, 8.7/125 or 10/125μm | |
25km |
Distance: 0~25km |
Output power:-15~-8dBm (dual-fiber),-14~-8dBm (single-fiber) | |
Receiving sensitivity: <-34dBm(dual-fiber), <-33dBm(single-fiber) | |
Connector: SC(standard)/FC(optional) /ST(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
40km |
Distance: 0~40km |
Output power: -10~-5dBm (dual-fiber),-9~-5dBm (single-fiber) | |
Receiving sensitivity: < -36dBm(dual-fiber),<-33dBm(single-fiber) | |
Connector: SC(standard)/FC(optional) /ST(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
60km |
Distance: 0~60km (when less than 15km, use attenuator) |
Output power:-5~0dBm(dual-fiber),-6~0dbm(single-fiber) | |
Receiving sensitivity: < -36dBm | |
Connector: SC(standard)/FC(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
80km |
Distance: 0~80km (when less than 15km, use attenuator) |
Output power:-8~-2dBm(dual-fiber),-3~3dbm(single-fiber) | |
Receiving sensitivity: < -36dBm | |
Connector: SC(standard)/FC(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) | |
100km |
Distance: 0~100km (when less than 15km, use attenuator) |
Output power:-6~-1dBm | |
Receiving sensitivity: < -38dBm | |
Connector: SC(standard)/FC(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) | |
|
120km
|
Distance: 0~120km (when less than 15km, use attenuator) |
Output power:-5~0dBm | |
Receiving sensitivity: < -38dBm | |
Connector: SC(standard)/FC(optional) | |
Type: dual-fiber | |
Wavelength: 1550nm | |
Send Inquiry to This Supplier
You May Also Like
-
Clean Room TelephoneUS$ 140 - 160MOQ: 1 Piece
-
Hot Sale Hdpe 40/33 Pipe for Fiber Optic CableUS$ 0.63 - 0.98MOQ: 30000 Meters
-
S42024-L5101-A120-02 Control Rectifier Switch Service BoardUS$ 100 - 3,000MOQ: 1 Piece
-
FC-FC Fiber Optic Patch CordUS$ 1.12 - 2.6MOQ: 10 Pieces
-
Cctv to ip Converter Cctv to tv ConverterUS$ 1 - 100MOQ: 1 Pair
-
Anritsu Site Master S331L PROMOTION PriceNegotiableMOQ: 1 Set
-
Strong Controllability 1310 Nm/1550 nm Wavelength FTTH Optical Receiver With Double WavelengthUS$ 10 - 50MOQ: 1 Set
-
Just for You Fiber Optics Light Up Paper Bag Vase, Paper Flower VaseNegotiableMOQ: 5000 Pieces
-
CYLINDRICAL MUTINATION PLUGSNegotiableMOQ: 1
-
USB AF-MINI USB 5P-B M Adapter VK2-0055NegotiableMOQ: 5000 Pieces
