Video Optical Transmitter

1pcs transmitter and 1pcs reciever.

video optical transmitter:

Name: Optical transmitter and receiver(8V+1D)Type: APT-201 8V+1DScale: Optical transmitter Single fiber 8-path single-direction video 1-path reverse-direction data digital
optical transmitter and receiver(8V+1D)

Specification

1. Fully data no condensation broadcast level transmit

2. No simulation frequency modulation, appearance modulation, amplitude modulation
optical transmitter's across modulation disturb.
3. Support any high exculpation rate video signal, auto compatible, PAL, NTSC, SECAM
audio system.
4. Support video no lose regeneration relay.

5. Support vidio, data, Ethernet, telephone sound side by side transmit

6. Gigabit fiber transmit technology, large capability, easy upgrade.

7. Fiber WDM/CWDM/DWDM technology.

8. Singlmode, multimode transmit distance 0-100M

9. Special ASIC design and high speed DSP technology

10. Advanced self-adapt technology, no have to adjust to use.

11. Fully surface adhibit technology

12. Industry level design, high dependability.

13. Independent module or rack mount style.

14. Support user handtailor and OEM.

Technical parameter

 (Video interfaces)

1. Video input/output impedance

2. BNC 75ohm unbalanced interface

3. Video input/output voltage

4. Typical peal value 1Vpp, maximum 1.5 Vpp

5. Video bandwidth: 8MHZ

6. Video digital bit width: 8 bits/10 bits

7. Differential gain: <1%

8. Differentia phase: <0.6

9. Signal-to-noise ratio: 67 dB (weighting)

(Data interface)

1. Physicalinterface Shielding surpassing Cat. RJ-45 terminal, industrial wiring terminal

2. RS232 speed: DC-115. 2Kbps

3. RS-422/485 speed: DC-1.2Mbps

4. RS-422/485 distance: 0-1200m

5. RS-422/485protocol: Transparently compatible with RS-485/422 protocol Compatible
with I/O on-off volume, alarming data, Manchester Code.

(Ethernet interface)

1. Physical interface: Shielding surpassing-Cat.5 RJ-45 terminal

2. Supporting protocol: IEEE 802.3 10Base-T 10M, 10/100M Ethernet standards

3. Working mode: Full duplex or half duplex

(Phone interface)

1. Physicalinterface: Shielding Surpassing-Cat.5 RJ-45 terminal, industrial wiring terminal

2. Voice bandwidth: 4KHZ

3. Working mode: Peer-to-peer hot line, SPC exchange/separating unit mode

(Optical fiber )

1. Physical interface: FC/UPC, ST/UPC, SC/PC

2. Transmission speed: 155Mbps, 1.25Gbps

3. Optical fibertype: Singlemodo/multimode optical fiber

4. Transmission distance: Multimode: 0-3km; Singlemode: 80km Working temperature:
-40~75degree