Pressure

Hydraulic Pump

12T manual pump is built-in on the bottom of frame

Bottom Hydraulic Cylinder Travel Distance

25 mm

Top Support Screw Adjustable Height

150 mm

• Split furnace with 55mm diameter heating chamber
• Max. working temperature: 1100ºC
• 30 segments programmable temperature controller with auto tune PID and over-heating protection
• Digital pressure gauge with max. pressure setting & alrm 

Machine Dimensions 

292mm(L) x 279mm(W) x 546mm(H)

Net weight

350 lb

Shipping Dimensions

14"(L) x 14"(W) x 25"(H)

Weight of shipment

410 lbs with 48"x40"x46"  dimension

• Pressing die is not included. Please click picture below to choose a die based on ing temperature in air.
  For higher temperature die, you may use Al2O3  or SiC die , which we don't supply in this momemnt.

• Please pay attention for max. working pressure on your die. Never go beyond the die's max. pressure limit at given temperature, otherwise, the die may be deformed or cracked
• The pressure applied to the die can be estimated as the below:
• ( Gauge Pressure x 0.38 ) / (D) , 
• ( D is die 's diameter in CM,  , pressure unit is T/cm2 )
• For example, die's diameter is 2 cm, pressure shown on gauge is 10MP, then pressure applied to the die is 1.9T/cm2 e.g 1900Kg/cm2, 190 MP

• CE Certified

One year limited