Contact Platform Support
Help Center96 Cav Pet Preform Injection Molding Machine
Related Products
-
PET Bottle Blowing-Filling-Capping Combi-block(22000BPH)NegotiableMOQ: 1 Set -
Carbonated Drink PET Bottle Blowing-Filling-Capping Combi-blockNegotiableMOQ: 1 Set
-
PET Bottle Blowing-Filling-Capping Combi-block(26000BPH)NegotiableMOQ: 1 Set
-
96 Cavity PET Preform MoldNegotiableMOQ: 1 Set
-
500ml PET Bottle Blowing-Filling-Capping Combi-blockNegotiableMOQ: 1 Set
96 Cav Pet Preform Injection Molding Machine
uses a new part cooling and handling system, which features:
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.
pet preform injection molding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 72 cavities.
pet injection systems offer:
1. Faster cycles
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up
Features:
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;
Reflex Platens
Reflex platens distribute clamp force evenly across the platen face.
Reflex platens:
1. Allow for 10-30% lower clamp tonnage
2. Decrease mold wear
3. Improve part quality
Injection Units
demark systems offer both reciprocating screw (RS) and two-stage injection units. RS units offer the performance required for many PET applications while two-stage is appropriate for higher throughput applications.
Polaris Controls
PC-based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment. Advantages include:
1. Faster cycle times
2. Improved shot-to-shot repeatability
3. Remote connectivity through ServiceNetLink
4. Control of molding system and auxiliaries from a single interface
Linear Bearings
Linear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.
Company Instruction:
Located in Zhangjiagang City of Suzhou, the Yangtze River Delta, our company has 50million RMB fixed assets, covers an area of 30,000 square meters, with a more than 30 professionals team to design and develop, is a key professional enterprise, which integrates development, research, design, manufacture, technology service and marketing, to manufacture complete sets of wine, beverage and sticky filling equipments.
We are adhering to the principle of "market-oriented, quality as the main line, service as the guarantee and repute as the basis". HY-Filling follows ISO9001:2000 international quality management system, it has established and improved the quality assurance system to ensure the quality and performance of the company's products. The Development department of HY-Filling, with advanced technologies, has more than 30 full-time design and development engineers. HY-Filling's technologies mainly sources from Italy, France, Germany, Switzerland and Japan; furthermore, a set of liquid filling production line with advanced technology and high starting-point has been developed combined with China's basic conditions, its high automation level achieved the one in late nineties. Department of After-sale Service of HY-Filling adheres to service goal of "Customers' needs are urgent, customers' requirements are important, customers' satisfaction is the aim", provides the services of equipment installation guidance, products testing, maintenance and spare-parts supplying, consultation, complaints, regular visit every 24 hours.
HY-Filling has a network of customers for the complete set of beverage bottling lines more than 500 which spreads 30 more domestic provinces, municipalities, autonomous regions and the United States, Britain, Japan, the Middle East, Southeast Asia, Africa, Russia, CIS, South Africa etc. Besides the production and sale of equipments, HY-Filling provides various technical services to help users design equipment layout, answer users' consultation, train users' staff and provide practical operation guidance.
Main Product:
- 2000-48000 BPH Mineral Water Bottling Line;
- 2000-40000 BPH Juice Bottling Line;
- 2000-40000 BPH Carbonated Beverage Bottling Line;
- 3000-40000 BPH Beer Bottling Line;
- 6000-30000BPH Aluminium Can Filling Line;
- 120-2000 Barrels/Hour 3-Gallon & 5-Gallon Filling Line;
- Edible Oil Filling Line;
- Aseptic Brick Packing Machine ;
- Aseptic Pouch Packing Machine;
- PET Preform Injection Machine;
- Bottle Blow Moulding Machine;
- Water Treatment;
- UHT Plant;
- Carbonating Mixer;
- Bottle Unscrambler;
- Film Shrink-wrapping or Carton Box Packaging Machine;
- Pa-Depalletizer;
- Turn Key Project.
Send Inquiry to This Supplier
You May Also Like
-
50T Plastic Injection Molding Machine SupplierUS$ 11,800 - 11,800MOQ: 1 Set
-
FHP Drive,Power Transmission PartsNegotiableMOQ: 1
-
Hydraulic CutterUS$ 1 - 10,000MOQ: 1 Piece
-
China Supplier Plastic Injection Molding MachineUS$ 8,999 - 19,999MOQ: 1 Set
-
2 Line Combing Drawing Sisal MachineUS$ 1 - 9MOQ: 1 Unit
-
Transmission Large Gear Customized in ChinaUS$ 1,500 - 6,000MOQ: 1 Metric Ton
-
Automatic Spraying Paint MachineUS$ 54,000 - 76,300MOQ: 1 Set
-
Mixing Machine of Wood Pallet MakingUS$ 6,000 - 13,800MOQ: 1 Set
-
Wrapping MachineryNegotiableMOQ: 1 Set
-
PET Strapping MachineUS$ 520 - 1,190MOQ: 1 Set
