Meanwell PCD-16-700 700mAconstant current led driver

Specifications

1. 700ma constant current led driver
2. constant current
3. MeanWell Warranty: 2 Years
4. TUV, UL, CE

                                                Welcome to Hopehill Family 

Meanwell PCD-16-700 700ma constant current led driver

Main Features

♦AC phase-cut dimming

♦ Work with leading edge and trailing edge TRIAC dimmers

♦ 115VAC or 230VAC models available

♦ Built-in active PFC function

♦ Constant current design

♦ Protections: Short circuit / Over temperature

♦ Cooling by free air convection

♦ Fully isolated plastic case

♦ IP30 design

♦ Class 2 power unit

♦ 100% full load burn-in test

♦ High reliability

♦ 3 years warranty

 

Specifications

♦  700ma constant current led driver 220v

♦  constant current

♦  MeanWell Warranty: 2 Years

♦  TUV, UL, CE

♦ Application: LED lighting

Product  Specification

MODEL		PCD-16-700
OUTPUT	RATED CURRENT	700mA
	OPERATING VOLTAGE RANGE	24 ~ 48V
	CURRENT RANGE	0 ~ 350mA
	RATED POWER	16.8W
	RIPPLE & NOISE (max.) Note.1	2.7Vp-p
	OUTPUT VOLTAGE (max.)	35V
	SETUP TIME	1000ms / 230VAC 2000ms / 115VAC at full load
INPUT	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR	PF 0.9 at full load and rated output voltage
	EFFICIENCY(Typ.)	81%
	AC CURRENT	0.4A/115VAC 0.2A/230VAC
	INRUSH CURRENT(max.)	40A/230VAC
	LEAKAGE CURRENT	<0.5mA / 240VAC
PROTECTION	OVER CURRENT	95 ~ 110%
		Protection type : Constant current limiting, recovers automatically after fault condition is removed
	SHORT CIRCUIT	Hiccup mode, recovers automatically after fault condition is removed.
	OVER TEMPERATURE	95°C ± 10 °C(TSW1) detect on heatsink of power transistor
		Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-30 ~ +60 °C(Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80°C , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 ~ 50 °C)
	VIBRATION	10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	UL1310 Class 2, TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V) approved
	WITHSTAND VOLTAGE	I/P-O/P:3.75KVAC
	ISOLATION RESISTANCE	I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH
	EMI CONDUCTION & RADIATION	Compliance to EN55015 Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2 Class C ; EN61000-3-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024,EN61547, light industry level, criteria A
OTHERS	MTBF	Khrs min. MIL-HDBK-217F (25 °C)
	DIMENSION	84*57*29.5mm (L*W*H)
	PACKING	0.19Kg; 72pcs/14.7Kg/0.75CUFT
NOTE	1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Direct connecting to LEDs is not suggested for models with “RIPPLE & NOISE” > 10% and using additional drivers is highly recommended.