Sleepapnea Infant Flow Cpap for Sleep Apnea Treatment

Specifications

1.Novel design
2.Cheap price.nice quality
3.Focus on nose and heart
4.Warranty guaranteed
5.Passed ISO. CSA

 

 

 PRODUCT'S NAME

 

    Sleepapnea Infant Flow Cpap for Sleep Apnea Treatment  

1.Overview

A continuous positive airway pressure (CPAP) machine is used mainly by patient for the treatment of sleep apnea at home. Obstructive sleep apnea occurs when the upper airway becomes narrow as the muscles relax naturally during sleep. This reduces oxygen in the blood and causes arousal from sleep. The CPAP machine stops this phenomenon by delivering a stream of compressed air via a hose to a nasal pillow, nose mask or full-face mask, splinting the airway(keeping it open under air pressure)so that unobstructed breathing becomes possible, reducing and/ or eliminating apneas and hypopneas. This has an additional benefit of reducing or elimination the extremely loud snoring that sometimes accompanies sleep apnea.

CPAP treatment can be highly effective in treatment of obstructive sleep apnea. For some patients, the improvement in the quality of sleep and quality of life due to CPAP treatment will be noticed after a single night’s use. Often, the patient’s sleep partner also benefits from markedly improved sleep quality, due to the amelioration of the patient’s loud snoring. It is the best way to help patients continue therapy by educating them on the health risks of sleep apnea and providing motivation and support.

a) Safety Introduction:(Please accept the belowed requirements to avoid to happen a accident)

1.The instrument is for indoor work,it should work in normal room temperature.

2To use the instrument by the doctor's advice, or only under the guidance of professionals.

3.To adjust the treatment pressure by the hospital’s doctors or licensed personnel.

4.The instrument used only for positive airway pressure, non-life support for critically ill patients.

5.Before using,to check your power strip,in condition of no damage,no leakage,then plug in, to ensure the safe use of electricity.

6When to transfer or to handle equipment, first turn off the power switch,then unplug the power plug.

7.To ensure fresh air indoors, not use in a hazardous gas environments.

8.If added the oxygen,to handle at the oxygen mask department.To prohibit to work in the intake of the instrument! To avoid burning.

9.After putting water into the humidifier, please do not flip the apparatus,to avoid water into the instrument to burn circuit. If do not use it for long-term,drain water from wet tank to prevent mildew.

10.Do not disassemble equipment chassis. .

b)Reliability Introduction

While the instrument works,if a power downs or a power lines is off, the instrument will alarm by beep, then, should turn off the power switch on back baord and check the cause,in case the power cord off,please re-plugged the power cord and then boot in order.

c) Travel with portable machine

The instrument is equipped with a special backpack for convenient travel, with 110v/230v manual conversion, can be adapted throughout the grid.

(d) Application Scope

This instrument applies to hospitals and family therapy obstructive sleep apnea syndrome.

e) Features

1.Enhanced digital temperature control, stable humidification effect,low body temperature .

2.Constant temperature and humidification in one, smaller volume, easy to carry.

3.Delaying step-up, comfortable sleep in condition of low pressure,.

4.With the power off alarm to ensure safety.

5.Low noise.

 

 

 

2.Main Specifications

 

1, Normal Working Conditions

 

Environmental temperature: 5 °C ~ 40 °C;

 

Relative Humidity: ≤ 80%;

 

Atmospheric pressure: 700hPa ~ 1060hPa;

 

1. Power Supply: AC voltage 110V ~ 230V ± 10%; Frequency 50Hz (or 60Hz).

 

2, The capacity of constant temperature wetting tank: 250mL.

 

3, Weight: 1.8kg.

 

4, Input power: 180VA.

 

5, The working system: continuously.

 

6, Security types: II class, type BF.

 

7, Fuse: 220V, 5A; Φ5mm × 20mm.

 

8, Pressure adjustment range: 4.0hPa ~ 20.0hPa ,adjustable interval 0.5hPa.

 

9, With 0 ~ 45min delaying step-up function, seting the interval 5min.

 

10,Humidication temperature is adjusted by 16 stalls,the temperature of the air outlet is less than 41 °C.

 

11, The machine noise: <45db.

 

12, Continuous working time: 8h-12h.

 

 

 

Normal Question and Treatment

Problems and Failure	Phenomena	Solution
Mouth drying,thoat dry- ing	Mouth drying,thoat drying after getting up	Add heating temperature, adjustment pressure
Nasal mucosa drying	Nasal disease and cold	before bedtime drop nasal by ephedrine to enhance wetting
Interruption treatment night	Remove mask automatically noct- urnal	Pressure adjustment is unsuitable,comp- ression or decompression
Fullness in head,dizz- iness	Fullness in head,dizziness after getting up	Pressure adjustment is unsuitable,com- pression or decompression
Blood pressure is low	After waering CPAP machine for period	Reducing the use of antihypertensive drugs or see doctor
Chest pain, coughing	After waering CPAP machine for period	Reducing the use of antihypertensive drugs or see doctor
There is water inside mask	There is water inside mask or tube.	Reducing the wetting, increase the indoor temperature
Low pressure	After using in period,feeling low pressure	Wash filtration cotton to reduce indoor dust and pipeline leak
High outlet temperature	After using in period,feeling higher temperature	Wash filtration cotton to reduce indoor dust
Don’t alarm	No sound after taking off the mask alarm	Check alarm setting,to return to factory for repairing
No normal outlet air	Right showing,no wind	To return to factory for repairing
Starting key failure	Turning on,can’t start	To return to factory for repairing

 

 

MORE DETAILS

 

 

 

ACCESSARIES

 

 

CERTIFICATES

 

FACTORIE'S VIEW