Contact Platform Support
Help CenterConstruct Metal Concrete Reinforcement Floor Paving Material
Related Products
-
Anti-cracking PP Raw Material Polypropylene Fiber for ConcreteUS$ 3.48 - 3.84MOQ: 4 Tons -
Good Quality Prefabricated Composites of Fiber Cement FlooringNegotiableMOQ: 1 Ton
-
Concrete Crimped Steel Fiber of High Rise Steel Building MaterialNegotiableMOQ: 1 Ton
-
Concrete Reinforcement Metallic Steel Fiber For Industrial ApplicationsNegotiableMOQ: 1 Ton
-
Concrete Reinforcement Metallic Steel Fiber Manufacturer For Industrial ApplicationsNegotiableMOQ: 1 Ton
Specifications
floor paving material1.Bow shape in cross section
2.Length:25mm, 30mm, 35mm, 38mm,40mm,50mm
3.Width:2.0-2.6mm
Item Name: construct metal concrete reinforcement floor paving material
Company introduction:
Chongqing Joywell Trade Co.,Ltd is an professional foreign trade company which was founded in 1999. We are on the market of building materials more than 14 years, obtained a good feedback both in domestic and overseas. There are kinds of steel fibers: melt extract stainless steel fiber, hooked ends cold drawn steel fiber, crimped steel fiber, cutting steel fiber, cutting micro steel fiber, copper coated steel fiber etc. Should you have any interests or suggestions, pls don’t hesitate to contact us directly.
What’s steel fiber?
Steel fibres are filaments of wire, deformed and cut to lengths, for reinforcement of concrete, mortar, cement slurry and other composite materials. They have anti-crack, anti-bend, anti-wear, anti-shear, anti-twist, anti-fatigue,stretching resistance, abrasion resistance characters. Widely be used in industry, military,construction, machinery, metallurgy, petrifaction, pottery areas.
Wide range of applications:
Highway pavements/road overlays Airport runways and taxiways Bridge/tunnel/mine
Composite metal decks Equipment foundations Concrete/shotcrete
Blast resistant structures Hydrodynamic structures Railway sleeper
Industrial ground floor slabs Dam and stabilization Spray anchor
Commercial and residential slabs Shock resistance structure Cemetery/cesspool
Army construction Mix with refractory Seismic design
How to use?
1.To put steel fiber and mixing stuff into mixer to mix 30---60 seconds, the steel fiber will distribute equally in mixing stuff to avoid agglomerate.
2.Then to put sand and concrete into mixer to mix 30—60 seconds.
3.Finally to add water into the mixer to turn and mix 2-3minutes.
4.To transport them to working place.
Caution:
To minimize the risk of minor injury when handling or finishing mixes containing steel fibers, gloves should be worn. Gloves of similar quality to those normally worn by concrete placing and finishing crews are adequate. The use of gloves and eye protection during loading of steel fibers to mixer is recommended.
1.Usage:
The projects blending the concrete steel fibre with concrete in a certain ratio will evidently strengthen bending resistance, stretching resistance, abrasion resistance and pressure resistance. It is widelyused in highway, bridge, tunnel,airport runway, basic structure construction of tall building, as well as shock resistance structure and high temperature kiln stove construction.
2.Feature:
Bow shape in cross section,it looks like ripple outside.
3.Specification:
Lengths of current products are 25mm, 30mm, 35mm, 38mm, 40mm,50mm. Widthis 2.0-2.6mm,
thicknessis 0.4-0.6mm,wave lengthis 6-7mm,waveheightis 2mm±0.2.
4.Chemical dataal property(%)
C |
Mn |
Si |
S |
P |
0.07-0.12 |
0.8-1.25 |
0.07MAX |
0.03MAX |
0.03MAX |
5.Technical Parameterl parameter
Tensilestrength:>700Mpa
6.Package:
Packing They are packed in bags made of two layers of paper and a piece of plastic film. 25kg/bag, 40 bags per pallet, and 20 metric tons per 20ft container. we also pack the products according to your requirement.
Our convincing certificates:
It is Amy whom be engaged in steel fibers, if you have any inquiries or questions, pls contact me
Trademanager:cn1501300393
Skype:amyliu109
Send Inquiry to This Supplier
You May Also Like
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
Fiberglass Insulation Roll Width 1.2m, Density 12kg/m3 With or Without Paper/aluminum FoilNegotiableMOQ: 100 Rolls
-
304 Stainless Steel Rib Lath Price Colombia V-Ribbed Lath Expanded Mesh for Structural Reinforcement in High-Corrosion AreasUS$ 1.7 - 3.2MOQ: 1 Piece
-
Gypsum Ceiling Metal Frame, Compatible With Armstrong Ceiling Grid ComponentsNegotiableMOQ: 1000 Pieces
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1
-
Unitized Frameless Glass Curtain WallUS$ 1 - 260MOQ: 200 Square Meters
-
Stainless Steel Stain Chrome Finished 36 Sheet Metal GaugeUS$ 1 - 30MOQ: 600 Pieces
-
Factory Direct Sale Steel Stand Coupler Scaffolding in Large StockUS$ 4 - 6MOQ: 5000 Pieces
-
ISO Access Cover Supplier Custom Made in Zhejiang China With 30 Years ExperienceUS$ 0.5 - 19.9MOQ: 500 Pieces
-
Antibacterial EPS Sandwich Panel for Prefab HouseNegotiableMOQ: 300 Square Meters
