Wi-Fi Antenna Dipole Adhesive Flex PCB With Coax Cable With U.FL Connector
Wi-Fi antenna dipole adhesive flex PCB with coax cable with U.FL connector 
(Dear,when you confirm the order , please confirmt the connector stype for me. Thank you very much!)
Test report of 2.4G PCB antenna
Electrical Specifications an Mechanical Specifications:
1. 12V supply voltage DC Copula
2. Historical supply current 60 0.03
3. Historical work 860MHZ frequency of 48 FM / TV
4. Gain 15 ± 3dB
5. 75 ohm output impedance
6. Ambient temperature -20 ° C to +70 ° C for Cameroon
7. Storage temperature -40 ° C to +90 ° C Cameroon
8. Application Connector : IEC / F/SMA-Series
9. Scope of application : a portable digital TV and home entertainment systems.
10. Installation : Direct installed at the receiver antenna interface, the first high-frequency receiver must have 5V or 12V power supply
Shenzhen Yetnorson Technology Co.,Ltd is one of the professional antenna maker focus on the development, design, manufacture, sale and Service of radio communications antennas. which has been dedicated to the antenna development like GSM/CDMA/PHS/3G/4G antenna, 2.4GHz (wi-fi, wlan)/3.5GHz (wimax)/5.8GHz/wi-fi amplifier communication antenna serial(including: all direction, yagi antennas ,3G parabolic antennas, panel antenna, indoor antenna like : ceiling mount antenna, Wall Mount Antenna, desk antenna, double polar, rubber, bandwide, card mount serial antenna. We also provide DVB-T/DMB-T/CMMB moving digital TV antenna, low frenquency antenna: 315MHz/433MHz wi-fi digital /wi-fi control /wi-fi wrote water meter/electricity meter antenna, GPS guide antenna, communicate parts, connector and so on. At present, Shenzhen Yetnorson Technology Co.,Lth.has developed more than 100 styles of antenna, with wi-fi internet, wi-fi electronic control, wi-fi end, wi-fi public telephone, wi-fi digital pass, wi-fi Satilla position, wi-fi Radio broadcasting communication field.
Refund & Replacement
1. We can guarantee the product quality within one years .
2. If parts cannot work, we will return payment or replacement to you.
3. Any items must be returned in their original condition to qualify for a refund or replacement.
4. The buyer is responsible for all the shipping cost incurred.
Quality is essential to both of us, we believe that High quality, Low price,Mutual benefit will be good basis of our cooperation!!!
GSMS PATCH ANTENNA
Send Inquiry to This Supplier
You May Also Like
-
Outdoor/Indoor 2400-2483 MHz/2.4GHz 12dB Omnidirectional Fiberglass WIFI AntennaNegotiableMOQ: 100 Pieces
-
2.4G 802.11b/g/n 20W WIFI Signal Booster With 1000mW 2.4GHz Wifi Signal Booster 20W for 5km Outdoor WifiUS$ 5 - 40MOQ: 1 Piece
-
698-2700MHz 3x1 RF Hybrid Combiner 3 in 1 Out n Female Connector DC-3GHzNegotiableMOQ: 1 Piece
-
50 Ohm DC-3GHz 10W Dummy LoadUS$ 1 - 25MOQ: 1 Piece
-
Communication Relay Board S42024-L3237-A107US$ 10 - 2,000MOQ: 1 Piece
-
Optical SplitterUS$ 55 - 95MOQ: 100 Sets
-
UFL Base IPEX/UFL Connector for rf Cable Antenna and PCB ModuleUS$ 0.16 - 0.32MOQ: 100 Pieces
-
Fujikura/Sumitomo Original Replacement Blade/Cutting Wheel for FC-6S, FC-7, CT-30 Fiber CleaversUS$ 50 - 130MOQ: 1 Piece
-
Professional Manufacture Direct for Metal and Plastic Electronic FaceplateUS$ 0.06 - 0.16MOQ: 500 Pieces
-
FRP Attenna CoverUS$ 2.5 - 4.2MOQ: 500 Pieces






