Steel Floor Deck Roll cold roll Forming Machine with Auto Stacker

Specifications

specialied in making Steel Floor Deck Roll Forming Machine
, we can design all kinds of pattern

 

  

  

  

  

Introduction

Steel floor deck sheet is rolled by WLFD series steel floor decking roll forming machine, the finished products are of many features, such as simple shape, large wave height, high intensity and good adhesiveness when pouring the concrete together with the welded steel wire net on-site. In the high-storey building, it not only can save steel mould board, but also reduce the bearing of the floor; on basis of equal capacity, it reduces the steel amount of engineering useage, so that it saves cost of investment.

WLFD series steel floor deck roll forming machine consists of uncoiler and its base, infeed guides, fixed position driven forming stations, shearing device, hydraulic station, PLC control console and so on. Our company has dozens of profile models for this series roll forming machine, such as WLFD76-305-915, WLFD51-240-720, and etc. We can design different kinds of profile and fittings for downpipe machine, as per customers' requirements.

Floor Decking Machine Features:

1) Material Spec:	Galvanized steel sheet
2) Thickness of Coil Sheet:	0.8 --1.2 mm
3)Main Motor Power:	18.5kw
4)Forming Speed:	10--12m/min
5)Hydraulic Station Power:	3kw
6)Quantity of Stands:	About 24 groups
7) Hydraulic Pressure:	10~12Mpa
8)Controlling System:	PLC
9) Index Error of Length:	10m±2mm
10)Total Weight:	About 1800kg
11) Voltage:	380V 3 phase 60Hz or at buyer’s requirement

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1)Passive Uncoiler:	1pcs
2)Embossing Equipment:	1set
3)Adjustable Device:	1set
4)Rolling Forming Equipment:	1set
5)Main Body:	1set
6)Post-cut equipment:	1set
7)Hydraulic station:	1pcs
8)PLC controlling desk:	1 pcs
9)Supporter table:	2 pcs
10)Security cover (optional):	1set