Contact Platform Support
Help CenterOverhead Conductors ACSR Merlin 336.4MCM to ASTM B232
Related Products
-
Aluminum Conductor Steel Reinforced--ACSR PantherUS$ 2,050 - 2,450MOQ: 1 Ton -
Overhead ACSR Goat Conductors 300mm2US$ 2,050 - 2,450MOQ: 1 Ton
-
Dog AcsrUS$ 1 - 10MOQ: 500 Meters
-
BS215 Overhead ACSR Condcutor 50mm2 RabbitUS$ 400 - 700MOQ: 1 Kilometer
-
BS215 Part2 ACSR Rabbit Conductors 50mm2 (6+1)/3.35mmUS$ 300 - 700MOQ: 1 Kilometer
Overhead conductors ACSR Merlin 336.4MCM to ASTM B232
Code name: Merlin
Standard: ASTM B232
No.wire/wire dia. of Al: 18/3.47mm.
steel: 1/3.47mm.
Overall Dia.: 17.5mm.
Linear Mass: 544kg/km.
Nominal Breaking Load: 38.23kN.
Max.D.C. Resistance at 20 °c: 0.1691ohm/km.
1. Applications
ACSR conductors have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
2. Service Performance
2.1.The permissible long-time operating temperature for aerial conductor is 70oC.
2.2.Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
2.3.When connecting conductors,the conductor beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
2.4.Under installaion,the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.
3. Product Performance
3.1.The electrical performance of ACSR is indicated in DCΩ/km (20oC).The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ. m of international standard value.
3.2.The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.
a.The tensile strength of all aluminum conductors is denoted with the result of all cross sections of aluminum conductors multiplied by min.tensile strength of corresponding size specified in the standard for aluminum wire.
b.The tensile strength of all steel wire is denoted with the result of all cross sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.
4. Material Standard
Production can be arranged according to customers requirements for material standard,etc.
Send Inquiry to This Supplier
You May Also Like
-
Sick YF8U14-050VA3XLEAX - Sensor/actuator CableNegotiableMOQ: 1 Piece
-
Pesticide Spraying Machine Wire Harnrss Tractors and Agricultural Machinery Cable AssemblyNegotiableMOQ: 1 Unit
-
4/8/16/32CH Channels Multi Cable With Wheel/6 UTP Multipair CableUS$ 500 - 800MOQ: 10 Pieces
-
Low Eccentricity Bulk Electrical WireUS$ 1 - 10000MOQ: 1 Piece
-
Competitive Price LMR400 Coaxial CableNegotiableMOQ: 10 Kilometers
-
Energy Saving High Temperature Self-Regulating Heat Trace Cable for Industrial ApplicationsUS$ 1.4 - 2.4MOQ: 1 Meter
-
Fireproof CableNegotiableMOQ: 500 Meters
-
Hot Sale Magnet Polyesterimide Flat Enamelled Super Aluminum WireUS$ 4.89MOQ: 500 Kilograms
-
Advanced Self-Regulating Heating Cable for Freeze Protection & Temperature MaintenanceUS$ 0.98MOQ: 10 Meters
-
Sports and Gym Equipment Silicone Grip Pipe Wrapping TapeNegotiableMOQ: 1 Roll
