ISO 9001 Factory YEM313AH Single Phase Electronic Power Meter , Analog Meter / Counter Energy Meter

Model YEM313TH single phase electronic front board installed active energy meter

is a kind of new style single phase two wire active energy meter, it adopts micro-

electronics technique, and imported large scale integrate circuit, use advanced

technique of digital and SMT techniques, etc. The meter completely accords with

relevant technical requirements of class 1 single phase active energy meter

stipulated in international standard IEC 62053-21. It can accurately and directly

measure 50Hz or 60Hz active energy consumption from single phase AC

electricity net, it is used for setting indoor or setting out door directly, and it can

display total energy consumption by step motor type impulse register. It has

following features: good reliability, small volume, light weight, specious nice

appearance, convenient installation, etc.

1. Front board three fixed installation, the cover is made of PC material which is transparent and anti-UV molded overall, the bottom and the terminal of the meter are made of black glass fiber which can fire-retardant and enhanced PC material, and the IP rating up to IP56. It has following features: good weatherability, anti-impact, good insulation performance, specious appearance, etc.
2. Standard configuration the bottom and the terminal of the meter are closed by the screw of the meter, may select the bottom and the terminal of the meter are closed by ultrasonic. (Please specified when ordering).
3. Standard configuration 5+1 digits display (99999.1kWh) by step motor type impulse register. May select 6+1 digits display (Product Configuration code is UC).
4. Standard configuration one port of pulse output passive(polarity),May select increase a distant port of pulse output passive (nonpolarity). And contact with all kind of AMR system conveniently,Complying with standard IEC 62053-31 and DIN 43864.
5. Standard configuration only one LED instructions signal of energy impulse (red), may select add instructions power supply state (green) and automatic detection the direction of the flow of load current and instructions by LED (when display yellow, that is meaning the direction of the flow of load current reverse). Please specified when ordering.
6. Single direction single component measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
7. Direct connect operation, there are two types wiring you may select. Standard configuration type 1A wiring, may select type 1B wiring (Product Configuration code is AH).
8. Standard configuration extension terminals cover, in order to protect to use safety, may select short terminals cover. (Product Configuration code is AG).