Hot Sale Automatic Wall Finishing Machine Cement Plaster Mchine

                   Hot Sale Automatic Wall Finishing Machine

                                   Cement Plaster Mchine

-Developed with a new second-generation low-emission gasoline engine, emissions in line with the EPA standard ,the Euro Ⅱ and the second phase of China(2015 implementation);

-New overall design, innovative and generous;

-Adopted the gearbox of stable performance and high reliability which has been tested by the market, and can let the users more confidence;

-Steel blade with chrome plating, blade wear resistance and longer life. Plastering Machine

1.Automatic plastering, automatic lifting, one-time molding, adjustable thickness, no fly ash.

2.Out of the site 2 meters in height by 0.8 meters can be freely, without removing any component, which be provided with a universal wheel, flexible movement.

3.Independent research and development to ensure the delivery of mortar mortar pump, strong power, which is guaranteed to improve efficiency.

4.No scaffolding, runway and steel reinforcement, 1-2 can operate.

5.It it does not need shooting leveling, no dead angle, no cracks, no leakage of ash, door, window, corner column angle, which can adjusted freely , mortar flow speed, reach to ten times more than manual plastering .The plastering quality reached or exceeded the national standard of engineering quality, improve the quality of the project to reduce the project time.

6.It has the follow advantages : small volume, convenient to move, simple operation, high efficiency, energy saving, water saving, material saving, reduced cost, strong adhesion, no fly.

7.All electrical products equip with high sensitivity leakage protection device apply for construction which is easy to use and transport. ash, long service life etc. Plastering Machine

1.Patter hasn’t changed to plaster angle,click start switch machine but does not start, avoid scratch board

2.Startup if motor reversal, the machine will automatically cut off power supply, in order to protect the steel wire rope not disc 3.Machine down stuck will automatically cut off power supply, in order to protect the steel wire rope not disc

4.Wire rope exposed, found that the coarse will change in time, if the steel wire rope broken, the machine with abnormal decline in 20 cm will be stuck

5.All the activities of the joint, fastening screws through antirust processing, all bearing sealing treatment, all accessories from the best of the domestic enterprises.To create the most suitable and highest efficiency, best quality, the world's most advanced machinery.

6.Ahead of the heavy machine design, even if the hydraulic oil loose also won't back down. Plastering Machine