LR50/5NPPU Bore 5mm OD17mm H7mm Sealed Precision Track Rollers Constructed With Double Row Angular Contact Ball Bearings

Specifications

TRACK ROLLERS
LR5…KDD / LR5...KDDU / LR5...NPP / LR5...NPPU
LR50...KDD/LR50...NPP		LR50...KDDU/LR50...NPPU		LR52...KDD/LR52...NPP LR53...KDD/LR53...NPP			LR52...KDDU/LR52...NPPU LR53...KDDU/LR53...NPPU
LR5...NPP	LR5...NPPU	LR5...KDD	LR5...KDDU	Dimensions (mm)					Weight
				d	D	B	C	Rs	≈(g)
LR50/5 NPP	LR50/5 NPPU	LR50/5 KDD	LR50/5 KDDU	5	17	7	7	0.2	10
LR50/6 NPP	LR50/6 NPPU	LR50/6 KDD	LR50/6 KDDU	6	19	9	9	0.3	20
LR50/7 NPP	LR50/7 NPPU	LR50/7 KDD	LR50/7 KDDU	7	22	10	10	0.3	20
LR50/8 NPP	LR50/8 NPPU	LR50/8 KDD	LR50/8 KDDU	8	24	11	11	0.3	30
LR5000 NPP	LR5000 NPPU	LR5000 KDD	LR5000 KDDU	10	28	12	12	0.3	30
LR5001 NPP	LR5001 NPPU	LR5001 KDD	LR5001 KDDU	12	30	12	12	0.3	30
LR5002 NPP	LR5002 NPPU	LR5002 KDD	LR5002 KDDU	15	35	13	13	0.3	50
LR5003 NPP	LR5003 NPPU	LR5003 KDD	LR5003 KDDU	17	40	14	14	0.3	70
LR5004 NPP	LR5004 NPPU	LR5004 KDD	LR5004 KDDU	20	47	16	16	0.6	120
LR5005 NPP	LR5005 NPPU	LR5005 KDD	LR5005 KDDU	25	52	16	16	0.6	150
LR5006 NPP	LR5006 NPPU	LR5006 KDD	LR5006 KDDU	30	62	19	19	1	250
LR5007 NPP	LR5007 NPPU	LR5007 KDD	LR5007 KDDU	35	68	20	20	1	300
LR5200 NPP	LR5200 NPPU	LR5200 KDD	LR5200 KDDU	10	32	14	14	0.6	70
LR5201 NPP	LR5201 NPPU	LR5201 KDD	LR5201 KDDU	12	35	15.9	15.9	0.6	80
LR5202 NPP	LR5202 NPPU	LR5202 KDD	LR5202 KDDU	15	40	15.9	15.9	0.6	110
LR5203 NPP	LR5203 NPPU	LR5203 KDD	LR5203 KDDU	17	47	17.5	17.5	0.6	170
LR5204 NPP	LR5204 NPPU	LR5204 KDD	LR5204 KDDU	20	52	20.6	20.6	1	230
LR5205 NPP	LR5205 NPPU	LR5205 KDD	LR5205 KDDU	25	62	20.6	20.6	1	340
LR5206 NPP	LR5206 NPPU	LR5206 KDD	LR5206 KDDU	30	72	23.8	23.8	1	510
LR5207 NPP	LR5207 NPPU	LR5207 KDD	LR5207 KDDU	35	80	27	27	1.1	660
LR5208 NPP	LR5208 NPPU	LR5208 KDD	LR5208 KDDU	40	85	30.2	30.2	1.1	750
LR5302 NPP	LR5302 NPPU	LR5302 KDD	LR5302 KDDU	15	47	19	19	1	150
LR5303 NPP	LR5303 NPPU	LR5303 KDD	LR5303 KDDU	17	52	22.2	22.2	1	210
LR5304 NPP	LR5304 NPPU	LR5304 KDD	LR5304 KDDU	20	62	22.2	22.2	1.1	340
LR5305 NPP	LR5305 NPPU	LR5305 KDD	LR5305 KDDU	25	72	25.4	25.4	1.1	500
LR5306 NPP	LR5306 NPPU	LR5306 KDD	LR5306 KDDU	30	80	30.2	30.2	1.1	670
LR5307 NPP	LR5307 NPPU	LR5307 KDD	LR5307 KDDU	35	90	34.9	34.9	1.5	970
LR5308 NPP	LR5308 NPPU	LR5308 KDD	LR5308 KDDU	40	100	36.5	36.5	1.5	1200

Series LR52.. and LR53.. can be re-lubricated through a hole in the inner ring.

• Double Row Angular Contact Ball Bearings with Crowned or Cylindrical Outer Rings • Allows to Carry Load of Axial and Radial Direction • 52100 or 440C (9Cr18Mo) for corrision-resistance • Normal radial clearance for applications thermal expansion is not a factor • Conforms to ABEC-3 precision within a narrow range of variation • Polyamide 66 cage can reduce friction, vibration, and noise • Available with shields or NBR Seals • Multi-purpose grease used ( Shell Alvania S2 is standard for us )

Feature

•  Series LR rollers are also called Cam Rollers, can be used in the heavy loads track or used as an idler wheel.They are widely used in the particular application that the friction should be reduced.

•  The outer surface of rollers is shaped to the crowned runner surfaces with R500 (suffix U), so make the stresses well when rollers working

•  Rollers take the internal structure design of deep groove ball bearings or double row angular contact ball bearings and have a particular thick-walled outer ring, so the rollers can accommodate higher loads.

•  Rollers are made of the high-quality bearing steel,processed by heat treatment and precision grind, and are filled with a long service life, high-grade and multipurposes grease. Rollers take the metal shields (suffix KDD or ZZ ) or rubber seals (suffix NPP or 2RS ) to prevent the dust. Some types of the rollers can be made from the corrosion resistance stainless steel 440C(9Cr18Mo)  

Characteristics of guide system that LR series roller applied

•  Low resistance and long service life and widely use
Being cam rollers with crowned runner surfaces R500, make its stresses in well-distributed between rollers and track when working, thus the stresses centralization are avoided, the friction resistance are reduced and the service life of rollers have been improved a lot. Most of the double row cam rollers can be relubricated through the filling hole on the inner ring to adapt the adverse working conditions.

•  Easy installation
As rollers assembled the concentric or eccentric pivot, installation can be made conveniently. To adjust the eccentric one's eccentricity, these rollers can get the fitting preload.

•  Smooth running, minimum error and lower noise level
Besides we produce the series LR cam rollers according to the standard of rolling bearings, we also make the strict control on the rotary accuracy of outer ring to meet special working mode that inner ring is fixed while outer ring running.

Packing

• For express ( Plastic Tube + Neutral Boxes + Neutral Cartons )

• By vessel ( Placstic Tube + Neutral Cartons + Plywood Pallets or Cases )

Delivery ways and Times

• 3~7 days ( Door to door servies )  by FEDEX / DHL / UPS ...

• 35~60 days by vessel for big amount order  

• Free Sample

• Customer brand and Packing  is available

• Customer size is available in condition of a commercial quantity 

Welcome to Shanghai C&H Bearings Co., Ltd

Established in 2006, the C&H pioneering and professionalism commitment to the bearing and transmission component markets. Through over seven years of exploration in those markets, C&H has built a high level of technical and services team.

Nowadays, C&H has gained extensive customer recognition in the bearing and transmission market with its professional services. It has developed customers over 20 countries and regions. In particular, it has nurtured good reputation in South America.

C&H owns not only an outstanding technical service delivery team within China, but also powerful supply chain and integration capacity as well as wide product range that contributes to the one-stop, customized solution for customers.

Our customers can buy bearings, auto parts, trucks and trailer parts from C&H, majority of which are industry bearings, automotive bearings. These products can be produced according to the specific requirements of customers. Besides, all of our products have passed through the authentication of ISO9001 and TS16949.

C&H adheres to the pursuit of excellence, strives for perfection, values customer satisfaction most.

C&H will continue to strive for excellence, deliver C&H products to all over the worlds, so that more users can enjoy our products and services!

Welcome your any inquiry ! 

Give Us a Chance, Return You a Surprise! 

A. For Track Roller and Guide Wheels, If C&H can produce more precision wheels?

By now, the available tolerance for C&H is UP to ABEC-3.

B. If C&H can produce low noise track roller and guide wheels, what's the grade?

Yes, Z1 is avaiable.

C. If C&H can supply concentric or eccentric bushings ?

We are developing these product. 

We also supply V Guide Wheel, Dual V Guide Wheels, LFR Series Track Rollers and Wire Straightening Wheels .......