Yoke type trak roller-LR6, LR2

Specifications

Single row deep groove ball bearings
Cylindrical or crowned profile outer ring

 

Item	Dimensions   (mm)				Mass
	d	D	B	C	≈(g)
LR604	4	13	4	4	10
LR605	5	16	5	5	10
LR606	6	19	6	6	10
LR607	7	22	6	6	10
LR608	8	24	7	7	20
LR6000	10	28	8	8	20
LR6001	12	30	8	8	30
LR6200	10	32	9	9	50
LR201	12	35	10	10	50
LR202	15	40	11	11	70
LR203	17	47	12	12	110
LR204	20	52	14	14	150
LR205	25	62	15	15	230
LR206	30	72	16	16	330
LR207	35	80	17	17	400
LR208	40	85	18	18	450
LR209	45	90	19	19	500

 

LR, LRU ...... Cam Rollers with Cylindrical or Crowned Profile outer ring

 

-Series LR rollers are also called Cam rollers, can be used in the heavy loads track or used as an idler wheel. They are widely used in the particular application that the friction should be reduced.

-The outer diameter surface of rollers is shaped to the crowned runner surfaces with R500 (prefix " LRU "), so make the stresses well when rollers working.

 

-Rollers take the internal structure design of deep groove ball bearings or double row angular contact ball bearings and have a particular thick-walled outer ring, so the rollers can accommodate higher loads.

 

-Rollers are made of the high-quality bearing steel processed by heat treatment and precision grind, and are filled with a long service life, high-grade and multipurposes grease. Rollers take the metal shields (suffix ZZ or KDD ) or rubber seals (suffix 2RS or NPP) to prevent the dust. Some types of the rollers can be made from the corrosion resistance stainless steel.

 

Characteristic of guide system that LR Cam Rollers are applied 

 

-Low resistance, long service life, widely-use

Being cam rollers with crowned runner surfaces R500, make its stresses in well-distributed between rollers and track when working, thus the stresses centralization are avoided, the friction resistance are reduced and the service life of rollers have been improved a lot. Most of the double ro cam rollers can be relubricated through the filling hole on the inner ring to adapt the adverse working conditions.

 

-Easy installation

After rollers assembled the concentric or eccentric pivot,installation can be made conveniently. To adjust the eccentric one's eccentricity, the rollers can get the fitting preload.

 

-Smooth running, minimum error

Besides we produce the series LR cam rollers according to the standard of rolling bearings, we also make the strict control on the rotary accuracy of outer ring to meet special working mode that inner ring is fixed while outer ring running.