Two way spring-lox-For the up-lox position raise rear of car

Two way spring-lox-For the up-lox position raise rear of car

1.For the up-lox position raise rear of car to relieve weight on springs.This will aid you installing spring-lox.

2.For the down-lox position,it is recommended to keep full weight on rear coils by not raising rear end of car.

3.Check for clearance to make certain that assembly will not rub against parts of vehicle.

4.Tighten adjusting nuts to a position where assembly is wedged  in tight and coils have been spread or compressed sufficiently to retain spring-lox in solid position,repeat on other spring.