Direct factory crimped wire mesh for mine sieve

Crimped Wire Mesh common specifications: 

Diameter 1.0mm x mesh opening 8mm or 10mm 
Diameter 1.5mm x mesh opening 12.5mm, 15mm or 20mm 
Diameter 3mm x mesh opening 15mm, 20mm, 30mm 
Length and width specifications: 1mX25m 1mX30m 1.2mX25m 1.2mX30m

Crimped Mesh Material:
Black iron wire,304 stainless steel wire crimped mesh,316 or 316L stainless steel wire crimped mesh, the steel wire crimped mesh also can be required.

Characteristic of the crimped wire mesh for mine sieve

1,Precision mesh opening and good sieving effect.

2,Good abrasion resistance and a long service life.

3,Smooth surface and stable structure.

4,Pre-bending process and good tensile strength.

 Quality assurance of the crimped wire mesh for mine sieve 

Mesh aperture tolerance: -3%~3%

Wire diameter:-0.03mm~3mm

Wire spur:>wire diameter,<half of an aperture

Diagonal deviation:(1) for the narrow and long, wide and long mesh (length > 2m), allows the diagonal error between 0 - 12mm;

(2) for short, wide and short mesh (length < 2m), allows the diagonal error between 0 - 9mm;

Mesh tightness judgment: pinch wire head weft, weft wire to ensure at the edge of a slide in the second warp filaments without sliding as appropriate, if not the net surface in boundary screw tight.