Temperature and Humidity Compound Salt Spray Chamber(lower Temperature)
Specifications
Temperature and humidity Compound Salt Spray ChamberIt is used for imitating natural status in increase imitation test.
Temperature and humidity Compound Salt spray chamber
Temperature and humidity Compound Salt Spray Chamber is used for imitating natural status in increase imitation test. The imitating condition is harder than status that we usually meet.The tester can simulate and combine the following status such as: salt smog, dry, humidity, normal temperature, low temperature. It is available to program or conduct the tests independent. The tester is designed for products used in intense changeable environment, such as parts of automobile,
airmaterial, photographic equipment, building materials, electroplate films&coatings and electrical&electronic system etc. It is suitable to resist to metal electrochemical corrosion.
Model |
YL-2209-A |
YL-2209-B |
YL-2209-C |
YL-2209-D |
|
|
Interior Test Chamber Dimension (cm)(W×D×H) |
90×50×60 |
120×85×50 |
160×100×55 |
200×120×60 |
|
|
Exterior Test Chamber Dimension (cm)(W×D×H) |
146×91×128 |
220×120×145 |
260×145×155 |
300×165×160 |
|
Capacity of the chamber(L) |
270 |
480 |
800 |
1440 |
|
|
Capacity of the salt water tank(L) |
25 |
40 |
|||
Power |
AC 220V 50HZ |
AC 380V 50HZ |
|||
|
temperature&humidity of the operating environment |
+5°C~ +35°C / <85%RH |
||||
air pressure |
86~ 106Kpa |
||||
Lab. temperature |
NSS ACSS 35°C±1°C |
||||
CASS 50°C±1°C | |||||
Pressure barrel temperature |
NSS ACSS 47°C±1°C |
||||
CASS 63°C±1°C | |||||
Dry test |
lab. temperature:40°C-70°C±0.5 |
Humidity:30%-98±5%RH |
|||
Constant temperature&humidity test |
lab. temperature:RT°C-70°C±2 (without humidity if the temperature is below the -25°C |
||||
temperature cooling time: 35 mins for -70~RT°C |
heating up time: 60 mins for RT-50°C |
||||
Temperature accuracy:±2°C/Humidity:30%-98±2%RH | |||||
humid heat test |
Test Temperature:45°C±2°C |
Test Humidity:85%~98% ±2%RH |
|||
salt density |
with the density of 5% sodium chloride solution or to add 0.26 g copper chloride per litre with 5% sodium chloride. |
||||
PH value |
NSS&ACSS:6.5~7.2 / CASS:3.0~3.2 |
||||
compressed air pressure |
1.00±0.01kgf/cm2 |
||||
Temp. Stability |
less than ±0.5°C |
||||
Temp. Uniformity |
less than 2. 0°C |
||||
Temperature accuracy |
less than ±2.0°C |
||||
salt fog settlement |
1.0~2.0ml/80cm2/h (the average value after collecting 16 hours at least) |
||||
material |
imported corrosion resisting,aging resistance, high strength P.V.C board |
||||
heater |
corrosion resisting U type Titanium Tube |
||||
temperature load cell |
Pt100 platinum resistor |
||||
temperature controller |
LCD digital display multicolor touch screen temperature controller |
||||
spraying mode |
continuous / batch type spraying (optional) |
||||
Demist device |
yes |
||||
safety device |
over temperature protection,earth leakage protection,state caution light etc. |
||||
strong wooden case for the tester
Workshop
Factory photos
Certification
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Computer Control Hydraulic Universal Testing MachineNegotiableMOQ: 1 Set
-
Universal Testing MachineNegotiableMOQ: 2500 Pieces
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
-
New Design Measuring Meter With Best PerforanceUS$ 1,000 - 1,200MOQ: 1 Piece
-
XK-1 Rotary Switch Life TesterNegotiableMOQ: 1 Set









