Contact Platform Support
Help CenterAC Capacitor Polypropylene Film Capacitor, AKMJ-PS Series, 10uF, 450V.AC
Related Products
-
Copper Nut/screw Leads, ac Polypropylene Film Capacitor, AKMJ-S SeriesNegotiableMOQ: 1 Piece -
AC Capacitor Polypropylene Film Capacitor, AKMJ-S Series, 3*200uF, 450V.ACNegotiableMOQ: 1 Piece
-
Film Capacitor, Polypropylene Capacitor for Car ac Filter ChangeUS$ 1 - 50MOQ: 1 Piece
-
Film Capacitor, Polypropylene Capacitor, ac Filter CondenserUS$ 1 - 50MOQ: 1 Piece
-
Film Capacitor, Polypropylene Capacitor, ac Filters CapacitorUS$ 1 - 50MOQ: 1 Piece
AC capacitor AKMJ-PS Series, 10uF, 450V.AC
Introduction:
• Plastic, Sealed with epoxy resin;
• Leads with Tinned copper wire, small size, easy installation;
• Low ESL and ESR;
• High pulse current.
Application:
•Widely used in power electronic equipment used for the AC filter.
Installation &commissioning procedures
1. Do not touch capacitor terminals by hand directly while taking them.
2. Check Physically
3. Fixed capacitors
4. Ensure for correctness of supply voltage, frequency, temperature
5. Connect capacitor
6. Switch on supply
7. Check main supply voltage & current
8. Capacitor is commissioned
Storage conditions
1.Capacitors may not be store in corrosive atmospheres, particularly not when chlorides, sulfides, acids, lye, salts, organic solvents or similar substances are present.
2. It shouldn’t be located in particularly high temperature and high humidity, it must submit the following conditions(unchanging primal package):
Temperature: ≤35℃
Humidity: ≤80%RH, no dew allowed on the capacitor.
Storage time: ≤12months(from the date marked on the capacitor’s body or the label glued to the package)
FAQ:
Q : Are you a manufacturer or a trading company ?
A: We are a manufactuer specialized in metalized polypropylene film capacitor since 2011.
Q: How can I get some samples ?
A : We are honored to offer you samples for free, but the new clients are expected to pay the express cost, and the charge will be deducted from the payment for formal order.
Q: Can your factory print or emboss my logo on the goods ?
A : Yes,we can print or emboss your owns logo on the goods or their packing box.
Q : What's your MOQ of this product?
A: MOQ is 1 pc ,if more,please check with us firstly.
Q: What's your delivery time?
A : It is about 21-30 days, if your goods required urgent, please contact us firstly.
Send Inquiry to This Supplier
You May Also Like
-
6\"/8\" FramesNegotiableMOQ: 500 Pieces
-
Turing F1280 High-Resolution IR Module: Precise Thermal Perception for Continuous OperationNegotiableMOQ: 50 Pieces
-
Oven Capacitor CH85 2100VAC Capacitor for MicrowaveNegotiableMOQ: 1
-
20kA Surge Protective Device SPD (SP-D10)US$ 0.01 - 0.02MOQ: 1 Piece
-
IRFP450,100% New and Original. Top Sales!!!NegotiableMOQ: 100 Pieces
-
Miniature Capacitor 2.7v1f 6.3x9mm Super CapacitorUS$ 0.35 - 0.5MOQ: 100 Pieces
-
50V 10UF CapacitorUS$ 0.5 - 1MOQ: 200 Pieces
-
BNCHG Terminal Block Pin Connector for Over 12 Year ExperienceUS$ 0.35 - 0.4MOQ: 10000 Sets
-
Bimetal Thermal Switch 250V 5A-25ANegotiableMOQ: 1000 Pieces
-
Water Leak Detector ,Wireless Water Leakage Sensor,WLD100US$ 1 - 10MOQ: 28 Units
