HUAWEI WS331 Wireless Repeater

he HUAWEI WS331 Wireless Repeater is a radio signal repeater that can work with wireless access points (APS) to extend the wireless network coverage. Using the WS331 over a wireless network effectively helps solve radio signal issues, such as signal impairment and attenuation.

Wireless Protocol: Support 802.11n, compatible with 802.11b/g
Speed : 300Mpbs
Antenna : internal antenna, support MIMO
Operating Freq: 2.4GHz
Mode : Repeater
1. Increases the range of existing wireless network
2. Easy integration or configuration via browser by WPS possible
3. Supports Wi-Fi 802.11 b/g/n
4. Small and flexible to use, simply plug into the socket
5. Transfer rate: up to 300 Mb/s
6. Supports the following multiple authentication modes on the WLAN interface Open system Wi-Fi Protected Access-pre-shared key (WPA-PSK) WPA2-PSK

Key Features:
- Simple Plug in installation
- WPS Pairing - Easy push button configuration
- Support for WEP, TKIP AES encryption
- Supports all common WiFi standards
- Up to 150m WiFi Range

Home User:
The number of consumer electronic products which uses WiFi connectivity continues to grow, creating a natural demand for wider WiFi coverage around the home from devices which include games consoles, TV's, Printers, smartphones and many more devices. Domestic WiFi routers tend to be sited next to the landline master socket, typically in the hallway or at the one side of the house which is not always the most effective location for distributing signal throughout the building. The Huawei WS331 can be sited at any point in the home to provide a strong signal and minimise black spots.

Business User:
The Huawei WS331 provides an easy solution for business users to extend a WiFi network for employee or customer use at minimal cost; these can be used as a simple extension to an office network, help signal strength at restaurants, hotels, cafes and many other places of interest. The Huawei WS331 avoids the need for expensive cabling or additional routers.

Setting-up:
The WS331 can be set up easily in just a few steps
Plug WS331 into a power socket
Press the 'pairing' button (WPS) on the existing WiFi router
Press the 'pairing' button on the Huawei WS331
Wait a few seconds, the status light on the WS331 will turn green
Huawei device will begin to relay the existing WiFi signal using the same network name(SSID) and password (encryption)
Devices can be seamlessly connected to the WiFi network as normal
WPS is supported by most recent Wifi routers (e.g. BT Home Hub), if WPS is not
available then a web-based setup administration console will guide the user through steps required to configure the device.

Post Included:
1 x Huawei WS331 Wireless Repeater
1 x User Guide