Needle roller and thrust ball bearing NKX25 , NKX25Z

Tube & Box Marking:1. Laser marking on outer face of outer ring like Brand, 2.Print Brand on Rubber/Metal shield..

Specifications

Needle roller and thrust ball bearing NKX25:
1.Single direction axial
2.high loading capacity
3.High stiffness
4.High speed

   Needle roller and thrust ball bearing NKX25 , NKX25Z

 

Product details

 

 needle roller / thrust ball bearings in the NKX series combine a radial needle roller bearing and a thrust ball bearing based on the 511 series. They are able to support single-direction axial loads in addition to radial loads. They also permit relatively high-speed operation.

 

NKX series

NKX series needle roller / thrust ball bearings do not have a cover around the thrust ball bearing. As a result, both the ball and cage assembly and shaft washer can be mounted separately from the rest of the bearing.

 

 

 

NKX .. Z series

NKX .. Z series needle roller / thrust ball bearings are non-separable. They have a stamped steel cover that extends over the shaft washer of the thrust ball bearing. It is firmly attached to the housing washer that is integral to the needle roller bearing outer ring. The cover makes these bearings non-separable. We  supplies the thrust ball bearing in this series filled, as standard, with a high-quality grease that has good rust inhibiting properties. The cover, which has no lubrication holes, forms a gap-type seal with the shaft washer to retain the grease in the bearing.

 

 

Needle roller and thrust ball bearing NKX25 , NKX25Z

Shaft Diameter	Bearing Designation		Boudary Dimensions				Basic Load Rating				Limiting Speed
	Without fixed cages	With fixed cages					Radial		Axial
mm			FW	D	C	C1	Co	Cor	Co	Cor
			mm				N				rpm
10	NKX 10TN	NKX 10ZTN	10	19	23	9	6200	7800	10000	12100	12000
12	NKX 12	NKX 12 Z	12	21	23	9	9000	11000	10300	13300	11000
15	NKX 15	NKX 15 Z	15	24	23	9	10700	12700	10500	14500	9500
17	NKX 17	NKX 17 Z	17	26	25	9	11900	15000	10800	15700	8500
20	NKX 20	NKX 20 Z	20	30	30	10	16400	23800	14300	21400	7500
25	NKX 25	NKX 25 Z	25	37	30	11	18800	30500	19600	32000	6000
30	NKX 30	NKX 30 Z	30	42	30	11	22600	36000	20400	36500	5000
35	NKX 35	NKX 35 Z	35	47	30	12	24300	41500	21200	41000	4600
40	NKX 40	NKX 40 Z	40	52	32	13	26000	47000	27000	54000	4000
45	NKX 45	NKX 45 Z	45	58	32	14	27500	53000	28000	60000	3600
50	NKX 50	NKX 50 Z	50	62	35	14	38000	74000	29000	65000	3300
60	NKX 60	NKX 60 Z	60	72	40	17	42000	90000	41500	97000	2800
70	NKX 70	NKX 70 Z	70	85	40	18	44500	92000	43000	110000	2400

 

 

Lubrication

 

   For lubrication, the outer ring has a lubrication groove and lubrication holes. NX and NKX are lubricated with oil. The end cap in NX has lubrication holes. NX..-Z and NKX..-Z are lubricated with grease. The axial bearing component is greased using a lithium complex soap grease to GA08. The end caps do not have lubrication holes.

 

 Presentation 

 

Hot-selling

 

AXK0414TN    AXK0515TN      AXK 6X17X2        AXK 0619         AXK 6X23X2  AXK7X15X1.5TN     AXK 0821TN

AXK10X22X2   AXK 1024         AXK 10X27X2.5   AXK 1226TN    AXK 1528      AXK16X35X4.762

AXK17X33.5X3   NTA-1220      AXK 2035            AXK 2542/P5   NTA-1828     AXK 30X42X2.5       S3401G-013

AXK 3552      AXK43X65X4.9    AXK 5070            AXW 30          AXW 35         AX W40  AX W45