100T/H mobile asphalt machine

Specifications

100T/H asphalt machine:
1.installation is easy
2.transportation is convenient
3.less environment pollution

100T/H mobile asphalt machine:

1.Modular design, convenient and fast to move and install.

2.Screening, hot storage, weighting are on one folding frame, can realize main tower “one truck to trail”.

3.Few transport vehicle, installation foundation need no special handle.

4.Compact design, cover very small area.

5.Accurate screening, weighting, batch mix can guarantee high quality.

6.International classic quality control system, has long distance fault detect and maintain function.

 

Basic Configuration 0f 100T/H mobile asphalt machine:

1.Cold aggregate supply mobile modular (include elevator)

Each cold feed bin is equipped with the feeding belt and sound-light alarm device, when aggregate conveying capacity below the lower limit or suddenly lack of material, the device will alarm immediately to notify the operator handle in time. The door of the cold feed bin can be appropriate adjustment to meet the requirement of the aggregate configuration

 

2.Inclined belt feeder

 The vertical roller and carrier roller adopts built-in oil-sealed lubricating bearing which can work in long time without lubrication. Both ends of collecting tilted belt conveyor are equipped with medial clean up scraper and lateral clean up scraper, which ensure belt surface in good working condition and reduce belt abrasion

 

3.Dry drum moving module(include oil burning system)

The drying drum welded together by steel plate. After being thrown into drying drum, the aggregate goes into the special design blade, which makes the material falling uniformly like the “aggregate curtain”, so that the aggregate can make sufficient heat exchange with the hot smoke produced by the burner. There special thermal protection blade in the flame burning zone will ensure no “aggregate curtain” in this zone, make sure the flame fully burning, and form a protection layer between the blame and the internal wall of the drying drum in order to reduce the heat loss.

 

4.Hot aggregate elevator(put in cold supply modular during transportation)

Hot elevator adopts chain bucket elevator. The drive reducer is equipped with direction setting anti-reversal device which has been manufactured when the plant was pre-assembled and routine test.

 

5.Dust moving module(include leve one dust collector and draught fan chimney)

The bag of the bag house filter adopts high temperature resistant material, which can withstand 220°C high temperature. All the bags mouths are equipped with spring buckle, combing with the special bag support frame, to make sure the installation of the bag quickly and reliably.

 

6.Mix tower mobile module

The mixing tower adopts high position design (two discharge method: discharging the mixed material into material mover, then discharging into the mixed material storage silo; discharging the mixed material directly into the truck from the bottom of the mixing tower or the mixed material storage silo.

 

7.Filter supply mobile module(include filter elevator)

 

8.Bitumen supply mobile module(include thermal oil furnace system)

 

9.Set aside type finished product bin (optional)

 

100T/H mobile asphalt machine:

Item	Parameter	Remark
Capacity	100t/h	Rated operation condition
Cold aggregate bin	4
Belt feeder	Consistence: inclined belt feeder, oversize screen	Inclined belt feeder equipped with emergency stop and pull switch
Dry drum	Diameter: 1800mmX8m, capacity: 120t/h	Adopts four-wheel friction drive, universal connection, driving smoothly and carry load uniformly.
Burner	Diesel/heavy oil	Burner equipped with gas ignition, has high ignition success rate. Medium atomization, sufficient burning.
Hot aggregate elevator		Double row guide slide plate chain elevator, friction drive, discharge hole adopts special structure, can reduce wear and noisy.
Dust moving module	Bag house dust collection	Adopts downstream injection mode, has good dust removal effect, make the service life longer.
Mix tower mobile module	1 set three layers semi-structure vibration screen(monopodium outlay)
	Four insolation warehouse	Equipped with continuous level gage
	Weighting system adopts single bin, 4 pints hang, with transport fixed components, weighting capacity: aggregate 1250kg, powder 170kg, bitumen 90kg	The sensor adopts Sino-US TOLEDO, with accuracy weighting, weighting error automatic compensation.
	Double inducer drive, twin shaft reverse rotation mixing tank
Mineral powder supply system	Consistence: filter elevator, new and recycle powder bin, filter weighting device, two sets screw conveyor	Screw conveyor exit equipped with butterfly valve, to control the impulse; filter temporary storage bin pneumatic break arch
Bitumen supply mobile module(include thermal oil furnace system)	30m³ bitumen tank 1 set, 10m³ diesel tank 1 set, 2m³ dump tank 1set, pipe and pump,. 300000 kcal thermal oil furnace one set, valve 1 set.	Use conduction oil to heat bitumen. The temperature grow fast, easy to use. Bitumen tank setted on the ground, easy to discharge bitumen.
Set aside type finished product bin	One horizontal transport cart, one lifting transport cart, one reject bin, one finished product storage bin, one winch, one diesel spray device;	Optional
Air circuit system	two air compressor, two 600L gas storage tank, one 350L gas storage tank, Simple air compressor machine room, cylinder, solenoid valve for each one set.	Taiwan airtac solenoid valve, cylinder with reliable performance and long service life.
Electrical control system	One set