Home > Products > Graphite crucible > graphite crucibles for sale
graphite crucibles for sale
- 5000 Piece / Pieces per Month
- Qingdao
- T/T L/C D/P D/A Credit Card PayPal
Product Details
Type: | High Strength | Application: | Melting Metal | Height: | Request |
Composition: | High Pure | Top Diameter: | 10-600mm | Bottom Diameter: | 10-1000mm |
Place of Origin: | Shandong, China | Brand Name: | NEWLAND | Model Number: | XDD-003 |
Product Description
High pure graphite crucible
Packaging Details : Wooden case and wooden pallet or pack as customer's requirement
Delivery Detail : Normally 10 working days after deposit received
Density | >1.85g/cm3 | Ash | <0.01% |
Working Temp. | 2000Deg.C | Compressive Strength | >85Mpa |
Flexural Strength | >45Mpa | Grain Size | 400mesh |
Electric Resistance | 7-9 μ Ω.m | Carbon content | 99.99% |
The following picture is taken in kind:
1. Thermal stability: According to the quench acute thermal using conditions of graphite crucible, we will specially design the production procedure, so as to ensure the reliability of product quality.
2. Corrosion resistance: Even and fine basic design will delay the erosion of crucible.
3. Impact resistance: Graphite crucible can bear high thermal impact, so any process can be carried out.
4. Acid resistance: The adding of special materials will greatly improve the quality of crucible, especially its index of acid resistance., and will prolong the service life of graphite crucible.
5. High heat Conduction: High content of fixed carbon ensures the good heat conduction, shorten the time of dissolution, and remarkably reduce the energy consumption.
6. Control of metal pollution: The component of material under strict control will ensure that graphite crucible will not pollute the metals when dissolving.
7. Quality stability: The process technology of forming under high pressure and quality guarantee system will fully ensure the stability of quality.
1. Graphite crucible cannot be exposed in moisture, and must be placed in indoor dry place or wooden shelf. Maintain ventilated. Moisture is strictly prohibited. Damped crucible is likely to crack.
2. Each crucible, especially damped ones, must be preheated and roasted in drying equipment or next to a ground furnace before use. The roasting temperature should start from a low temperature of 100°C below. Roast it to 150°C at a speed of not higher than 30°C per hour. Preserve the heat for about 8 hours and then dry it. The crucible dried next to a ground furnace should be placed at least for one shift, and often turned to change direction, till workers feel the internal wall of crucible is hot.
3. The melting time for the first time should be at least twice of the normal melting time, in order to avoid cracking inside the crucible due to heating up too fast, or even cracking immediately when the fire sets on.
4. Handle with care. Falling or shaking is strictly forbidden in order to present cracking. Crucible should be placed below the mouth of furnace to prevent the furnace lid abrading the upper edge of the crucible and thus affecting the capacity.
5. Pour out the remaining cold metals inside the crucible after use, and then add new materials. Carefully and gently add new materials into the crucible. Feed materials according to the capacity of crucible. It is not allowed to feed too many materials, in order to prevent crucible from swelling or bursting.
6. Knock gently to remove slags and cokes on the internal and external wall of the crucible. Avoid damaging the crucible body.
7. In the melting process, do not add chloride solvents in order not to corrode the crucible. For the furnace that uses oil and coal gas as fuels, the oil wind should not reach one part of the crucible directly. Turn around the crucible from time to time, in order to avoid local damage.
8. Clamps and other discharging tools should comply with the shape of the crucible. During furnace discharging, remove the cokes on the external wall of the crucible, and lower the furnace temperature; do not discharge at high temperature after stopping blasting. Clamp the upper and middle parts instead of the top of the crucible in order not to damage the crucible. Graphite crucible is used mainly to melt gold, silver and other precious metals.
Contact Us
- Qingdao Newland Graphite Products Co., Ltd.
- Contact nameXianhao Shi
- Phone86-532-82418888
- Addressthe town of wubei,the city of Laixi,Qingdao,China Qingdao,Shandong
- Graphite crucible for melting precious metals
- Melting metal graphite trough
- Graphite Crucible,Double ring graphite crucible
- Graphite Crucible
- High purity Chinese Graphite Crucible
- Graphite Plate Graphite Sagger Graphite Crucible Graphite Boat for Tungsten Carbide Cemented Carbide Vacuum Sintering Furnace
- Graphite Crucible for Induction Heating Furnace Melting Furnace,Graphite Crucibles for Aluminum Vacuum Evaporation Coating
- Metal High Temperature Smelting, Gold and Silver Fusion Casting Graphite Crucible
- Graphite Crucible,metallurgy Graphite Crucible,melting Metal Graphite Block,High Pure Graphite Graphite Crucible
- Graphite crucible
- Graphite crucible
- Graphite crucible
Popular Searches
Recommended Products
- SiCa powder for filling CaSi wire/ CaSi 0-3mm Si55 Ca30 /silicon calcium Alloy powder
- SiCa granule / Calcium silicon granule 3-8mm / CaSi lump manufacturer
- CaSi cored wires / SiCa cored wire /Calcium silicon ferro alloy wire
- low sulphur calcined petroleum coke/CPC/GPC for graphite electrode/steel plants/calcined petcoke
- Incoloy 825/625/926/925/N08810 Nickel Alloy Rod/Bar Stock in Factory
- N10665/NS322/N10675/NS323/N06030 Nickel Alloy Rod/Bar Polished
- NS321/N10276/N06455/N10001/2.4617 Nickel Alloy Rod/Bar Manufacturer supplies
- NS333/2.4819/N06022/N10001/Hastelloy C-2000 Nickel Alloy Rod/Bar ASTM/AISI standard
- Hastelloy C-22/Hastelloy C-4/B-3/C-276/ C Nickel Alloy Rod Customized Surface
- Hastelloy X/25/S/G-30/Hastelloy C-2000 Nickel Alloy Rod/Bar Hot/Cold Rolled Manufacturer
- Cold Rolling Aluminum Tube for Cooling circulation system
- calciumsilicon ferroalloy powder 0-2mm 0-3mm / CaSi alloy powder
Find Similar Products By Category
- Minerals & Metallurgy > Graphite Products > Graphite Crucible
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Xianhao Shi
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-