nylon 6 peel ply

Peel Ply is a finely woven nylon fabric with an added release agent to which epoxy cannot bond. Apply Peel Ply to the surface of the wet epoxy and allow to cure. After the epoxy has set simply peel of the Peel Ply, which in turn will remove any surface Amine Blush, and you will be left with a woven impression resulting in no-need for washing and abrading between coats.

Material Nylon

Maximum Use Temperature 210°C

Nominal Weight 88g/m²

Nominal Thickness 0.152mm

Appearance White woven cloth with red tracer

Equipment

Note: If you do have the sticky surface because the resin was applied without peel ply, wash the surface with a clean rag soaked with acetone. The acetone will remove the uncured resin and allow load free sanding.

application:

logistics: