Colorful GRP FRP Profile Made of Epoxy Resin

1. Good dimensional stability

The thermosetting resin forming the substrate body crosslinked network structure in the process action of heat occurs, which article good dimensional stability under normal conditions, after the occurrence of shrinkage after molding is small. Products under long term continuous loads minimal change its shape and size, that little creep. Creep performance depends on the size of its load, high and low temperature and length of time of load factors. At a fixed load and temperature conditions, after a long time to load creep thermosets smaller than thermoplastics.

2. Excellent heat resistance, high temperature characteristics

Thermoset resin-based composite material can not be cured after softening, heat resistance and its products fairly stable, with a load of 1.86MPa, generally heat distortion temperature in the 150 ~ 260 ºC, and fiber-reinforced thermosetting plastics belong to excellent insulation material, the thermal conductivity is generally 0.35 ~ 0.47W / (mK), only metal 1/100 to 1/1000, it can be used as good insulation material and instantaneous high temperature materials, thermal deformation temperature of the material up to 350 ºC, can be used as normal and high temperature structural materials. Glass / phenolic rocket, missile engines excellent insulation material.

3. Excellent electrical properties

Composites are excellent electrical insulation materials, more excellent terms of mica filler product obtained its electrical properties can be used to manufacture arc resistance, resistance, voltage, induction of superior special components. Since the composite material has excellent electrical properties, and its products there is no electrochemical corrosion and stray current corrosion, it can be widely used in the manufacture instrumentation, motors and electrical insulating components, in order to improve the reliability of electrical equipment and extend the life. In addition, the role of good products at high frequency and microwave dielectric properties permeability, has been used to manufacture a variety of high-frequency radar cover and other insulation products.

4. Excellent corrosion resistance

Resin-based composite materials and electrochemical corrosion of ordinary steel mechanism is different, it is not conductive, dielectric solution does not dissolve the ions, so the air, water and general concentration of acid, alkali, salt and other medium has good chemical stability resistance, particularly in the non-oxidizing acid pH value and fairly wide range of media are having a good stability. Therefore, it is widely used to make corrosion-resistant products for stainless steel can not deal with some of the media (such as hydrochloric acid, chlorine, carbon dioxide, sulfuric acid, sodium hypochlorite and sulfur dioxide) corrosion, played a good role.

5. FRP pultruded profiles good surface properties

When composite materials and chemical media generally have little contact surface corrosion generated, rarely scaling, so commonly used for producing a fluid conduit, its pipeline small resistance, low friction coefficient, saving a lot of power. Since the composite material is generally not as easily as metal ions to form metal contaminated media, so it is widely used in food and pharmaceutical industries composite article reason. In addition, the composite material has a high friction (PV) limit under water lubrication, the friction coefficient is very small, about 0.01 to 0.03, it is also preferred material wear-resistant products.

Application of pultruded products

1. Common package
2. Plywood pallet
3. Plywood box
4. According to customer requirements

Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers.

Our customers and certification

Q: Are you a commercial company or manufacturer?
A: We are a company with commercial company and factory together. Our trading company is called Hengshui Aoliande Trading Co., Ltd and the factory is called Hengshui Jiubo Composites Co., Ltd.

Q: I didn't see the dimension information or find the size I need, can you do it according to my requirements?
A: For FRP products, all dimensions can be customized. We can do it at the customer's request.

Q: How long is the delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the products are not in stock, it is according to the quantity.

Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free, but not pay the freight cost.

Q: What are your payment terms?
A: Payment <= 1000USD, 100% in advance. Payment> = 1000USD, 30% T / T in advance, balance before shipment.
If you have another question, please send us your question directly.