Car door/Car window Rubber Sealing

Specifications

rubber extrusion product
1. Small quantity accepted.
2. Quick shipment.
3. Heat-proof.
4. Low tooling charge.

Material	EPDM, NBR, Silicone, PU, TPV, PU, NBR+PVC, etc.
Material Characteristic	good aging resistant,  chemical resistant, water proof, hot water proof and steam proof, good insulation property, good elasticity and high tensile strength, etc.
Hardness	20~90 shore A or IRHD
Color	Any color will be ok, except transparent.
Dimension Tolerance	Strictly comply to ISO 3302 or upon your request.
Material Certificate	RoHS, FDA, ect
Processing technology	Extrusion

 

Performance:

1. RoHS approved, oil resistant, flexible, non-toxic, pressure resistant, abrasion resistant and corrosion resistant,anti-bending with much longer life;

2. Smooth surface, matte surface, foam density uniform( close cell, open cell), foam with adhesive;

3. Using range:the use of a wide temperature, high and low temperature resistance;

4. 100% virgin raw materials, and pass strict inspection, accord with eco-friendly requirement.

 

Features:

1. Widely used in sealing door and window with the door or window flange firmly to avoid dust, water or air to leak inside.

2. Widely used in sealing the gap of all kinds of machine equipment to advoid dust, water and etc.

3. mainly used in glass curtain wall, and also apply to some kinds of car ,vehicle,cabinet.

 

 

Packing

Inside: poly bags packed per batch; Outside: packed by K-A carton or other strong packing.

Shipment

Recommend economical shipment method upon the weight of the goods 1. Below 100kg, shipped by express (DHL, Fedex, UPS, TNT, EMS or other speical air line)  __ The goods would be arrived within 5-7 working days 2. Above 100kg, shipped by sea freight,   __ Port of dispatch: GZ huangpu, Shenzhen Shekou or Yantian, HK   __ The goods would be arrived within 20-30days, depends on the port of destination

 

  

 

 

1. Sample:     

      (1).  If you worry about our quality before ordering, we can supply you our current samples for free to check our quality       

      (2). After finishing the mold: we would supply the samples for your approval before mass production ensure everything is perfect.       

2. OEM / ODM service:

       OEM & ODM ar highly welcomed, we provide full technical support for free.

 

3. After-sales service:

      100% responsible for our products, supply active feedback within 24 hours and solutions in short time; supply re-work or refund if the mistake cuased by us.

 

 

Products and processing assurance:    

 

1. Individual silicon and rubber mixing room, special dust-proof silicon mixing room, assure the cleanness of the material.

2. Close management and dust-proof workshop to assure the cleanness of products and protect the projects confidential for our customers.  
3. Strictly quality control system upon ISO9001:2008 certificated by SGS. 
4. Precision testing equipments to assure the performance and the using life of the products.
5. 100% full inspection before packing to assure zero defect of the products.
  

Our advantage:  
 

1. Full technical support from concept design to final product delivery
2. On-time delivery with no compromise on quality
3. High-quality product making with advanced equipment and techniques

4. Large-scale of proudction available
5. Lower cost (medium-size factory, 3000 square meters), but high-end quality only(the same quality control system as per big factory)

 

 

 

Inqcuiry Tips:

Please don't forget to provide the following informations: 1. material requested; 2. size, drawings; 3. Material hardness; 4. the specific application; If you don't have all the details, pls tell us freely, we will try our best to assist you run through design, sample, and mass production.

 

 

 

1. Q:Are you factory or trading company?

A:We are an OEM rubber and plastic parts manufacturer.

 

2. Q:Where is your factory located?

A:Our factory is locating at No. 417, West of Xintang Avenue, Xintang Town, Zengcheng, Guangzhou, Guangdong, China, 511340 . About one and a half an hour from Airport to our factory. You are warmly welcomed to visit us.

 

3. Q: How does your factory do related quality control?

A: Control l high quality and services are our missions. We attach great importance to quality control from the raw material coming to product manufacturing according to ISO9001:2008 process. Welcome to contact us for knowing further informations.