SANPU 2013 hot selling CE ROHS waterproof IP67 24v smps power supply circuit led driver for bulb led strip transformer

Specifications

24v smps power supply circuit led driver for bulb led strip transformer
International AC input
2 years warranty
CE ROHS

  SANPU 2013 hot selling CE ROHS waterproof IP67 24v smps power supply circuit led driver for bulb led strip transformer

 

 

 

Feathers:

 

 1. Universal AC input / Full range;

 

 2. 100% full load burn-in test;

 

 3. Built-in EMI fiter with tiny ripple;

 

 4. High efficiency, high qulity, long life and high reliability;

 

 5. Abnormality protection function : short circuit ,over load ,over voltage,over temp;

 

 6. Convenient wiring;

 

 7. The product consists of indoor type and outdoor type;

 

 8. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.

 

 

LP Plastics waterproof LP35-W1V
MODEL		12V35W	15V35W	24V35W
OUTPUT	DC VOLTAGE	12V	15V	24V
	RATED CURRENT	2.9A	2.3A	1.45A
	CURRENT RANGE	0~2.9A	0~2.3A	0~1.45A
	RATED POWER	35W	35W	35W
	RIPPLE$NOISE(max.)NOTE2	100mV	100mV	150mV
	VOLTAGE TOLERANCENOTE3	±1%	±1%	±1%
	SETUP.RISE TIME	200ms 100ms
	HOLD UP TIME(Typ.)	30ms
INPUT	VOLTAGE RANGE	85-264VAC
	FREQUENCY RANGE	47~63HZ
	POWER FACTOR(Typ.)	PF>0.6/220VAC
	EFFICIENCY(Typ.)	85%	85%	88%
	AC CURRENT(Typ.)	0.85A/110V/0.38A/230V
	INRUSH CURRENT(Typ.)	COLD-START CURRENT30A/230VAC
PROTECTION	Short circuit	Protection Type:recovers automatically after fault condition is removed
	Over laod	102%~107% hiccup mode,auto-recovery
	Over temperature	≥105%°C cut off the output, auto-recovery
ENVIRONMENT	WORKING TEMP.	-20°C~+60°C
	WORKING HUMIDITY	20%~90%RH
	STORAGE TEMP.HUMIDITY	–40°C~85°C/10%~95%RH
SAFETY&EMC	SAEFTY STANDARDS	CE ROHS IP67
	WITHSAND VOLTAGE	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006;
		EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation

 

Introdution

 

 

 

Applications

Certificates

 

 

 

Logistics&Payment