CE ROHS 350W 5V waterproof led switch mode power supply supplier & manufacturer & exporter

Specifications

350W 5V waterproof led switch mode power supply
Certificates: ROHS ,CE
Life span:50,000h
2 years warranty

   SANPU CE ROHS 350W waterproof led switch mode power supply supplier & manufacturer & exporter

 

 

 

 Features:

 1. 350W 5V waterproof led switch mode power supply.
 2. The product consists of indoor type and outdoor type.

 3. Convenient wiring.

 4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .

 5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.

 6. Quality assurance: 2 years warranty.

 7 High efficiency .

 8.International AC input .

 9.Built-in EMI fiter .

 10.100% full load burn-in test .

 

 

 

FX Waterproof type FX350-W1V
MODEL		5V 350W	12V 350W	15V 350W	24V 350W	27V 350W	48V 350W
OUTPUT	DC VOLTAGE	5V	12V	15V	24V	27V	48V
	RATED CURRENT	70A	29A	23.2A	14.6A	13A	7.3A
	CURRENT RANGE	0~70A	0~29A	0~23.2A	0~14.6A	0~13A	0~7.3A
	RATED POWER	350W	350W	350W	350W	350W	350W
	RIPPLE& NOISE (MAX.)NOTE2	150mV	150mV	150mV	150mV	150mV	200mV
	VOLTAGE TOLERANCENOTE3	±2%	±1%	±1%	±1%	±1%	±1%
	SETUP , RISE TIME	200ms/220VAC 50ms/220VAC
	HOLD UP TIME(Typ.)	20ms/220VAC
INPUT	VOLTAGE RANGE	170~264VAC
	FREQUENCY RANGE	47~63Hz
	POWER FACTOR(Typ.)	PF>0.6/220VAC
	EFFICIENCY(Typ.)	81%	84%	84%	85%	86%	87%
	AC CURRENT(Typ.)	4A/230VAC
	INRUSH CURRENT(Typ.)	COLD START 50A/230VAC
PROTECTION	Short circuit	Protection type : recovers automatically after fault condition is removed
	Over load	105~135% hiccup mode , auto-recovery
	Over voltage	115%~135% Cut off the output , auto-recovery
	Over temperature	Rectifier ≥90°C cut off the output , auto-recovery
ENVIRONMENT	WORKING TEMP	-20°C~ +60°C
	WORKING HUMIDITY	20%~90%RH
	STORAGE TEMP , HUMIDITY	-40°C~+85°C,10%~90%RH
SAFETY &EMC	SAFETY STANDARDS	CE,ROHS
	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	EMC Test Standards	Conform to EN60950 GB4943 UL60950 Safety standards
		Conform to GB9254 EN55022 EMC standards
NOTE	1.All paraments NOT specially mentioned are measured at 220VAC input ,reted load and 25°C of ambient temperature 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 10 uf parallel capacitpr . 3.Tolerance : includes set up tolerance , line regulation and load regulation .