ISO CE ETCR9100S Portable Type H/L Voltage Clamp Meter

Function

Measurement of H/L AC leakage current, current online test;indirect test of current transforming ratio

Power supply

DC6V Alkaline LR03×4

Display mode

4 Digits LCD display, backlight; LCD dimension: 47mm×28.5mm

Test Mode

Clamp CT, integration mode

Meter Dimension

Tester: 68×245×40(mm)

Clamp Size

φ33mm

Resolution

0.01mA

Range and Accuracy

(23℃±5℃

Below 80%RH)

0.00mA~100.0A:      ±1%±5dgt

100.0A~600A:        ±2%±5dgt

Circuit Voltage

10KV(bare wire below1KV)

Data Memory

99 sets, memory process is shown by  MEM , full storage is shown by blinking FULL

PEAK Holding

Automatically maintain the high test value, in usual testing mode,

Press key HOLD till the lighting of PEAK, that is, start PEAK to maintain this function.

Data Hold

In usual testing mode, press HOLD key to keep data, shown by  HOLD

Data Access

MR indication, can access to all data

Overflow

Over-range overflow function: shown in OL A 

Auto power-off

15 minutes after boot

Battery replace

When battery voltage is lower than 4.8V, it will indicate to replace the battery.

Meter Mass

Tester: 335g ;Total: 1600g

Size of rod

φ32mmx320mm

Humiture

-25℃~40℃;  below 80%Rh

Insulation Strength

AC3700between insulation rod and core.

Accessories

Meter: 1pc, Case: 1 pc, Rod: 5 pcs, Battery(LR03):4pcs