ETCR6300D DC Current Leaker Clamp meter

Molde

Range

Resolution

Clamp size

ETCR6000

AC/DC  0mA~60.0A

1mA

φ7mm

ETCR6300D

DC  0.0mA~6.0A

0.1mA

25mm×30mm

Function

Measurement of DC current, leakage current, car leakage current  overhaul

Power Supply

Zn-Mn dry battery,6F22,9V, continuous use for 66h

Test Mode

Clip-on CT,The magnetic modulation

Clamp Size

25mm×30mm

Measurement Range

0.0mA~6.00A DC

Resolution

0.1mA DC

Accuracy(23℃±3℃,below 70%RH)

0.0mA~300.0mA DC: ±2%rdg±5dgt

0.30A~6.00A DC:   ±2%rdg±5dgt

Shield Property

Double shielding technology, strong anti-jamming capability

Display Mode

Four digits LCD display

Dimension

LWH:175mm×70mm×38mm

LCD Dimension

35mm×21.5mm;display domain:32mm×15mm

Sampling Rate

2 times/s

Range Shift

0.0mA~6.00A DC Automatically

Zero clearing

Press the ZERO key can be reset before the test

Polarity Indication

auto identified and display“—”

Test Position

Tested wire in the jaw center

Line Voltage

600V DC

USB Interface

Data stored in the memory of the meter via USB upload to PC

Data Memory

99units, FULL blinks when the memory is full

Peak Maintaining

Peak value capture hold function, press HOLD without Release to display peak value

Reading Hold

DH indicating the reading is hold

Out of Range

OL indicating the current is out of range

Auto Power-off

5 Minutes after power on, it will power off automatically to lower the power consumption

Battery Voltage

Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed

Weight

120g(including the battery)

Working Current

20mA

Humiture

-10℃-50℃,below 80%rh

Limit Temperature Error

-10℃-0℃ and 40℃-50℃, within 2%rdg

Humiture Storage

-10℃-60℃,below 80%rh

Insulating Strength

AC 3700V/rms. (between the alloy of the clamp and the housing)

Applicable safety rules

IEC1010-1,IEC1010-2-032,pollution:2,CAT Ⅲ(600V)

Accessories

Meter:1pc; USB communication line;Disk:1pc;Cloth bag:1pc