Professional New Type Three Cylinder Rotary Dryer

Pre-sale:Enthusiastic

We offer you the early planing of the project,the best process flow design,choose the best appropriate equipment model to design products according to your special needs.

After-sale:Considerate

To establish good business relationship,we adopt periodical visit to the users.We could give you the definite reply during 24 hours when the users meet some problems in the producing process.

Attention

1.We should install the machine under shelter from rain and do not put it in the open air directly.

2.Electric motor should be installed in the rear of the crusher and the direction of rotation should be consistent 

with the crusher. Reverse is forbidden.

3.The machine has six ground screws fixed on the concrete flood. The foundation need a place left for 

discharging the ore stone and the scope is not less than 50°. The base form should be decided by the users 

according the model of the feeder and transportation facilities.

4.Before debugging the equipment, we should tighten the screws and connect parts and check the lubrication 

conditions.

5.After launching, the machine should reach normal speed before feeding. The material should be inserted 

from the front and do not from the side in case of overload caused the accident.

6.Feeding must be stopped before stopping the machine. Only all the material have been broken is spit out

 entirely, stopping working is available.

Q:Payment                                                                                                                                                          
A:30% by TT as deposit on signing the contract, 70% by as final payment of balance after the client’s satisfactory inspection of the equipment prior to the goods leaving the factory.

Q: What about Warranty? what will we do if the machine is broken down                 

A: The warranty period for all of structural and mechanical equipment is one year. The warranty period for all electric motors is half one year. Wear parts are not covered by warranty unless the component part is found to be flawed.
 
Q: What should we need to do for if we want to get a best quotation                     
A: Hi, if you want us recommend a suitable type for you ,please let us know  as follows:
1).the capacity (tons per hour )

2).raw materials

Q: What could you help me to do for the business ?                                                                                    
A: Many thanks for your trust , we can provide you with proposal chart for complete production lines,spot inspection and operator traning according to your demands and the conditions of applied spot , we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on for rotary washer for sand washing.
 
Q:Delivery time                                                                                                       
A: Standard delivery time is 30 days from receipt of deposit,the special required machine is 45 days.