Contact Platform Support
Help CenterLintratek Selective Band Gsm1800 Repeater Cellphone Signal Repeater Gsm Dcs Signal Booster
Related Products
-
Selective Band 900/1800 Repeater Mobile Signal Repeater Gsm Dcs Signal BoosterNegotiableMOQ: 2 Pieces -
Lintratek Brand WCDMA 2100 10dbm Band Selective Signal RepeaterUS$ 1 - 200MOQ: 5 Pieces
-
3G WCDMA UMTS 2100M Repeater Indoor Wireless Mobile Signal Amplifier 65~75dBmNegotiableMOQ: 10 Pieces
-
Internet Multi Band Selective Repeater for All Mobile PhoneNegotiableMOQ: 10 Pieces
-
Wholesales Gsm Repeater Band 3 Gsm900 and 1800 and 3g BoosterNegotiableMOQ: 10 Pieces
Specifications
Selective band signal repeater gsm dcs booster1.Built-in AGC MGC
2.Auto shut off function
3.Elegant and compact design
Lintratek Selective band gsm1800 repeater cellphone signal repeater gsm dcs signal booster
1.Certificate:CE,ROHS
2.Qualitywarranty:2 years
3.Coverage 1500sqm
Why do you need to buy repeaters/boosters:
Model No |
KS20E-GD |
||
Parameter data |
Uplink |
Downlink |
|
Frequency Range |
UL:890-915/1710-1785mhz |
DL:935-960/1805-1880mhz |
|
Output Power |
20 ±2dBm |
20 ±2dBm |
|
Gain |
70 dB |
70 dB |
|
Bandwidth |
Wide Band |
||
Automatic Gain Control |
>20dB |
||
Ripple in Band |
≤5dB |
||
Intermodulation Products |
9KHz~1GHz |
≤ -36 dBm |
|
1GHz~12.75GHz |
≤ -30 dBm |
||
Spurious Emission |
9KHz~1GHz |
≤ -36 dBm |
|
1GHz~12.75GHz |
≤ -30 dBm |
||
Noise Figure @ max. gain |
≤ 6 dB |
||
VSWR |
≤3 |
||
MTBF |
>50000 hours |
||
Power Supply |
AC:90~265V, 50/ 60Hz;DC:12V 3A |
||
Power Consumption |
< 20W |
||
Impedance |
50 ohm |
||
Mechanical Specification | |||
RF Connector |
N-Female |
||
Cooling |
Heatsink Convection cooling |
||
Dimensions (D x W xH ) |
250*165*53 mm |
||
Weight |
2.5Kg |
||
Installation Type |
Wall Installation |
||
Environment Conditions |
IP40 |
||
Humidity |
< 90% |
||
Operating Temperature |
-10°C ~ 55°C |
||
Product picture:
Installation:
Step1: Use your mobile phone to test signal strength outside house or on roof, 70dbm is the basic requirement (full bar).
Step2: Install outdoor antenna in that location and keep adjusting, point it to signal tower
station, try to get best signal.
Step3: Run outdoor coaxial cable into building in a convenient location to connect with
signal repeater.
Step4: Mount your indoor antenna with signal repeater
Step5: Power up signal repeater device to check the signal inside, moving outdoor antenna
until you get satisfied signal.
Note: Connect outdoor ANT (BTS) port with outdoor antenna, connect indoor ANT(MS) port
with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should
be 10 meters far away from each other at least.Indoor and outdoor antenna must be
separated by wall.
Send Inquiry to This Supplier
You May Also Like
-
Gsm Dcs Wcdma 900 1800 2100 Selective Tri Band Oem Receiver RepeaterNegotiableMOQ: 50 Pieces
-
Gsm Band Selective System Booster, Mobile Single Band Signal Selective 900 RepeaterUS$ 1 - 280MOQ: 1 Piece
-
Lintratek Brand Gsm Selective System Repeater Mobile Signal 900mhz RepeaterNegotiableMOQ: 50 Pieces
-
Lintratek Brand Gsm980 Mobile Repeater Mobile RepeaterNegotiableMOQ: 5 Pieces
-
Lintratek Brand High-test Mobile Repeater Gsm 900mhz Mobile RepeaterUS$ 1 - 100MOQ: 5 Pieces
-
Gsm Mini Cell Phone Repeater From China Manufacturer Selective Band Home Signal RepeaterUS$ 1 - 100MOQ: 5 Pieces
-
AGC ALC Lintratek Brand 900mhz Mobile Phone Booster Repeater Gsm Communication EquipmentUS$ 1 - 100MOQ: 5 Pieces
-
Selective Band 980 Mobile Signal Booster /gsm Repeater /signal BoosterUS$ 1 - 100MOQ: 1 Piece
-
2100 Mhz Signal Band Selective Cellular Signal AmplifierUS$ 1 - 100MOQ: 5 Pieces
-
2100 Mhz Band Selective Cellular Signal AmplifierUS$ 1 - 100MOQ: 5 Pieces
