alibaba china supplier manufacturer 2" stainless steel thermostat mixer valve

Specifications

Factory
2" Thermostatic mixer valve
ISO9001:2008
Set range:35-45 or 50-60C
BSP,,DN50,2"

 

 

 

Thermostat mixer valve

 

 

 

 

Body:	Stainless steel
Shutter:	PPO
Springs:	Stainless steel
Seals:	Silicon Rubber
Temperature setting range:	35-45 C or 50--60C
Hot water inlet temperature range	50- 100 ºC
Cold water inlet temperature range	4-29 ºC
Temperature stability:	+/-3 ºC
Hydrostatic pressure	10bar
Max working pressure(dynamic):	5bar
Working pressure:	0.03-1Mpa
Ideal working pressure	0.1-0.5Mpa
Connections:	BSP,2",M
Flow rate (1 kg pressure drop)	250 L/min

  

1. Technical Data

DN50  G2”

Maximum working temperature:≤100℃

 

2. Materials of Construction

a. Valve body: Nickel plated brass

b. Connection: BSP, Inlets-M, outlet-M

 

3. Features:

a. Fail-safe on Hot or Cold Supply Failure

b. Delivers Stable Mixed Water Temperature

c. Idea for Domestic and Public Water Application

d. Tamper-Proof Cap

 

4. What is the thermostat mixer valve?

A Thermostat Mixer Valve is a valve that blends hot water (stored at temperatures high enough to kill bacteria) with cold water to ensure constant, safe outlet temperatures preventing scalding.

They shut-off rapidly in the event of a hot or cold supply failure to prevent scalding or thermal shock.

TMVs accurately control water temperatures for bathing, showering and hand-washing. They maintain pre-set temperatures - even if water pressure varies when other appliances are used. TMVs can be fitted under baths and basins, be part of shower fittings, or as a feature of exposed hot and cold water mixers.

 

5. Usage of thermostat mixer valve ?

Point of use mixing for wash hand basins, bidets, baths and showers in hospitals, schools, sport and leisure facilities, prisons and other public buildings.

 

6. Installation Precaution:

a. All installations should be carried out by a Licensed Professional.

b.Install in accordance with markings on valve body. i.e. hot water inlet-marked H, cold water inlet-marked C.

c. After temperature setting, if inlets temperature or pressure fluctuates, outlet temperature variation is within +/-3℃

d.The external check valves at inlets prevent cross-flow of hot&cold water when inlets pressure is not the same.

e.If the ratio between two inlets is too large, one flow-limiting valve should be fixed at the side of higher pressure.

f.Prior to installation, provisions should be made to flush the piping of any debris or other foreign materials to ensure proper system operation.

 

7. How They Work?

Upon use of tempered water, a thermostat in the mixing chamber of the valve senses the outlet temperature. The thermostat automatically positions a seat assembly which controls the flow of hot and cold water supplied to the mixing chamber. If the mixed outlet temperature increases, the thermostat will expand moving the seat assembly to allow the cold water inlet port to open more fully and at the same time restricting the hot water inlet port. Conversely, if the mixed outlet temperature decreases, the thermostat will contract moving the seat assembly to allow the hot water inlet port to open more fully and at the same time restricting the cold water inlet port. In both cases the mixed outlet water temperature is automatically and continually maintained at the preset temperature within the tolerances of the valve. In the event of a cold or hot water supply failure, the seat assembly moves to an extreme position shutting off the hot or cold inlet water port. A mechanical adjustment permits selection of the desired outlet water temperature within range of the valve.

 

8. Installation Precaution:

a.All installations should be carried out by a Licensed Professional.

b.Install in accordance with markings on valve body. i.e. hot water inlet-marked H, cold water inlet-marked C

c. After temperature setting, if inlets temperature or pressure fluctuates, outlet temperature variation is within +/-3℃

d. The external check valves at inlets prevent cross-flow of hot&cold water when inlets pressure is not the same.

e. If the ratio between two inlets is too large, one flow-limiting valve should be fixed at the side of higher pressure.

f. Prior to installation, provisions should be made to flush the piping of any debris or other foreign materials to ensure proper system operation.

keywords:alibaba china supplier manufacturer 2" 304 stainless steel thermostat mixer valve

 

 

 

SHENYANG BEIXIN ENERGY SAVING EQUIPMENT CO.,LTD

skype:sybxjn

tel:+86-013940169945