gold separator gold sand separator machine

Specifications

gold separator:
1.High quality, capacity
2.Good after-sale service
3.The steel is the best steel in China.

 

 

 

I. gold separator gold sand separator machine  Introduction

Gold Separator is applicable for the separation of nonferrous metal and ferrous metal. It is also

used for separating nonmetal, such as fluorite and talcum.

 

Each unit of flotation consists of two tanks. The first tank contains feeding pipe for sucking the pulp.

The second tank is auto flowing tankor direct flowing tank. There are middle chamber between the

two tanks. Below, the pulp is two connected together. The impeller is on the lower part of main shaft .

There are belt wheel on the upper part of main shaft for motor driving. The air is sucked by feeding

pipe. The pulp level in each unit is adjusted by sluice gate. There are cover plate and air cylinder
above the impeller. There is hole in the air cylinder for install feeding pulp pipe. The middle pulp pipe

is used for pulp recycling and the size of hole can be adjusted by tension rod.

The Gold machine is the machine which completes the flotation process directly. It consists of

stirring area, separating area and foam area from bottom to the top. The separating are is the key

area for pulp to form the mineralized foam. So the sufficient cubage and hight shall be ensured.

And there shall be form obvious boundary from stirring area.

 

 

II. gold separator gold sand separator machine Structure

Copper separator is made up of flotation and 

additional equipment (agitator bath, reagent feeder).

 

III. gold separator gold sand separator machine Feature

1. large air-absorption capacity

2. low energy consumption

3. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow.

4. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent.

5. There is self-control device on the surface of mineral slurry, so it is easy to adjust it.

 

 

V. gold separator gold sand separator machine Technical datas

Gold separator Model		SF-0.37	SF-1.2	SF-2.8	SF-4	SF-8
Effective cubage(m3)		0.37	1.2	2.8	4	8
Capacity(m3/h )		0.2~0.4	0.6~1.2	1.0~3.0	1.0~3.0	4.0~8.0
spindle	power(Kw)	1.5	5.5	11	15	30
	rotary speed(r/min)	386	340	268	226	191
Scraper	rotary speed(r/min)	17	16	16	16	16
	power(Kw)	0.55	1.1	1.5	1.5	1.5
Trough Size(mm)		700×700×750	1100×1100×1100	1700×1600×1150	1850×2050×1200	2200×2900×1400
Unit Weight per trough (kg)		468	1373	2138	2583	4129
Rated Voltage(V)		380V	380V	380V	380V	380V
Rated Frequency(HZ)		50HZ	50HZ	50HZ	50HZ	50HZ

 

gold separator gold sand separator machine

Before sales service:

Provide the program design and technological flow design; choose the most suitable equipment  for customer; 

design and manufacture products according to customer's demands; provide training of operational technicians 

for customer.

 

Sales service:

Finish the equipment inspection with you; assist you in drawing out the construction scheme and detailed flow.

 

After sales service:

Send technicians to installation site for the guidance, equipment adjustment and training.

 

Company Profile --  gold separator gold sand separator machine

Henan Songshan Heavy Industry Co., Ltd., a state-designated manufacturer by National Construction Department, has a history of over 30 years in machine manufacturing. We mainly specialize in manufacturing beneficiating, crushing and milling machines, such as Jaw Crushers, Impact Crushers, Double Roll Crushers, Sand Making Machines, Raymond Mills, Superfine Mills, Ball Mills, Flotation Separators, Magnetic Separators, Shaking Tables, and Dryers.      Since our establishment, we have been developing and updating our products according to the demand of markets. We ensure to provide excellent machinery to our customers, with advanced processing equipment, perfect technology and strict test. Our products have been sold well at home and abroad.       For years, our company has received the honor of "Following Contract and Keeping Promise Enterprise", "Quality-Trustworthy Enterprise", and "Excellent Enterprise". Our products have received the ministerial and provincial honors. Due to the high Quality and perfect after-sale service, our products have won trust and good comments from our customers and taken the lead in the machinery fields.      We will serve all our customers at home and abroad with excellent products and perfect after-sale service.

Copperseparator machine

Common malfunction and troubleshooting

flotation machine in the course of the malfunction occurred,treatment can be carried out in the following table.

 

gold separator gold sand separator machine

Please don’t hesitate to inform us:
1.What’s kind of your raw material? And the ore TEST REPORT?
2. Now your raw stone size?
3. What’s the capacity ? (T/H)
4. What’s the final ore concentrate grade request?
5. Others?

If possible,please send us some ore sample, we will do a test for you.