silicon rubber band heater

silicone rubber heating element, silicone rubber heating blankets

Features:
1. Silicon rubber heating cables are mainly used in refrigeration and air
conditioning

2. Advantages:
a) No extra thickness at connections
b) Cheap

3).Type:
a) RXQG1: cable with lead wire. Connection insulation between heating
part and lead wire with silicon moulding (totally waterproof)
b) RXQG2: cable with lead wire. Connection insulation between heating
part and lead wire with heating shrink tube with adhesive (weatherproof)
c) RXQG2: this cable has no visible connections, the limit between hot and
cold is indicated with a black mark

4.Insulation material: silicon rubber

5. Resistance: 10 - 10,000 ohm/m

6. Output: up to 40W/m

7. Max. surface temperature: 200°C

Technical Data:

1. Temperature range: -60.00~250.00degreeC(-76~+482Deg F)

2. Electric resistance precision: ±10%( bigger value selected)

3. Power density: 0.10~1.50w/cm²

4. Mechanical pressure: 100.00kg/cm²

5. Minimum bending radius: 3.20mm

6  thickness: standard 1.5mm    Minimum 0.5mm;

7 Voltage From 2 to 600 volts with either AC or DC voltage sources.;

8  Watt Density: Max 2 W/cm²;

silicone rubber heater Application :

1. Industrial equipment, pipelines, barrels, tanks, etc.  

2. Outdoors telecommunication equipment

3. Medical equipment and devices  

4. Outdoors electronic devices  

5.Thermal imaging of imaging equipment

6. Case protection under cold and moist environment  

7. Industrial ovens and thermal processing equipment

8. Ventilator supports    

9. Laminating equipment

10. Vessels 

.

Please specify the following when ordering:   

                                                                                                                                                                                                                     1) The diameter (mm) of heaters (inner diameter for external heating or external diameter for internal heating)

2) Width of heaters

3) Type, length and position of leads

4) The position and size of the hole for connecting thermocouple OR of the incision.

5) Voltage and power density

6) One piece OR two piece

7) Special gap between two pieces

8) Content of the laser stamping on the sheath of heaters if needed

9) Quantity