two components foam adhesive

Specifications

1.have a good quality
2.impact resistance,stripping resisance
3.attend auto exhibition
4.friendly adhesive
5.by handworking

Two-component room temperature curing adhesive,

component porportion ratio is 8:1

Two-component room temperature curing filter adhesive, component proportion ratio is 8:1
	Material-A	Material-B
Physical nature	White Viscous liquid	Black
Color	Based on your request to configure
Viscosity	30-45kpa.s
Bond strength	Initial bonding strength20-21KN/CM2
Peel strength	40-48KN/CM2
Purpose	It is applicable for paper filter of such internal combustion engines as automobile and tractor, the cementation between paper and iron sheet or plastic.
package	Plastic bucket or Tin bucket	Plastic pots
Storage	6-9 months
Working temperature	15°C-35°C

 

Usage

1. The surface of end cap is supposed to be washed clean for getting rid of oil stain and dust, and dried completely. Any oil stain, water or other impurities should not exist on the surface, or the adhesive strength will be affected.

2. Before the charge mixture, material-A in the barrel should be stirred or inverted, material-A and material-B are mixed at the mixture ratio of 6:1 and stirred evenly. 

3. Inject appropriate adhesive into the end cap and wait for a moment. The adhesive should be smeared evenly on every corner of cap surface.

4. Insert filter paper (or central tube) into the end cap and check the surfaces of two adhesive pieces. After complete contact, give a little pressure on the top of end cap and hold for a moment.

5. After curing for around four hours, reverse and adhere the other end cap. It can be packaged when complete drying after 24 hours and used after five day

 

 

 

This is warehouse--the existing stock(we can according to your requirement for the package ) 

 

 

Anping sanlian filtering equipment Co.,LTD

Http://cnfilteradhesive.en.china.cn

Address:  Hebei Province Anping County, Hengshui City, Hebei Filter City