dual component adhesive for oil filter(Direct factory)

Specifications

1.Anti-wear and oil resistance
2.Good gule for mental and paper
3.Impact and stripping resistance
4.attend auto exhibition

 

 One.features

1.Room temperature curing adhesive.

2.Anti-wear and oil resistance

3.Good adhesiveness for mental and paper

4.Impact resistance, stripping resistance, anti-vibration and anti-fatigue

5.Environmentally friendly products.

 

Two-component room temperature curing filter adhesive component proportion ratio is 6:1
	Material-A	Material-B
Weight	30KG	5KG
Physical nature	White Viscous liquid	Black
Color	Based on your request to configure
Viscosity	30-45kpa.s
Bond strength	Initial bonding strength20-21KN/CM2
Peel strength	40-48KN/CM2
package	Plastic bucket or Tin bucket	Plastic pots
Storage	6-9 months
Working temperature	15°C-35°C

TWO.Usage

1. The surface of end cap is supposed to be washed clean for getting rid of oil stain and dust, and dried completely. Any oil stain, water or other impurities should not exist on the surface, or the adhesive strength will be affected.

2. Before the charge mixture, material-A in the barrel should be stirred or inverted, material-A and material-B are mixed at the mixture ratio of 6:1 and stirred evenly.

3. Inject appropriate adhesive into the end cap and wait for a moment. The adhesive should be smeared evenly on every corner of cap surface.

4. Insert filter paper (or central tube) into the end cap and check the surfaces of two adhesive pieces. After complete contact, give a little pressure on the top of end cap and hold for a moment.

5. After curing for around four hours, reverse and adhere the other end cap. It can be packaged when complete drying after 24 hours and used after five days.

 

 

 

 

 

HTTP:Anping sanlian filtering equipment Co.,LTD

 Http://

Address: Hebei Province Anping County, Hengshui City, Hebei Filter City