pu foam adhesive for filter(manufacturer)

Specifications

1.the proportion 100:25
2.used for the air filter
3.good quality, reasonable price
4.attend the auto exhibition
5.ISO 9001

 

Tcomponent polyurethane adhesive for machine component proportion ratio is 100:25
	Material-A	Material-B
Weight	Small barrel :25KG	6.25KG
	Big barrel :50KG	12.5KG
Physical nature	orange-red viscous liquid (color based on your request to configure)	brown-yellow liquid
viscosity	800-1000MPa.S(25°C)	25-50MPa.S(25°C)
density	1.02g/ml	1.02g/ml
package	Plastic bucket or Tin bucket	Plastic bucket ,Tin bucket, Plastic pots
storage	1. Material-A and material-B can store up 3-6 months.
	2. To appropriate indoor storage above 15°C

 

 Usage:

1.The material must be full rocked after each to the plastic injection machine plastic injection so that the A material mixing evenly.

1.Everytime the plastic injection machine plastic injection A material must be full before the shaking in order to the   material until

2.AB material proportioning ratio of A:B=100:25 or 4:1.28°C,you can start operation

3.Material temperature controlled 24°C-28°C appropriate then you can start operation.

4. Must be clean before using the mould release agent (Note:

The new plastic mould can be wiped free)

5 .If A and B is not reaction please measuring A and B ratio.

6. A and B must be sealed to .To avoid the air and water vapor reaction, as a result affecting the effect of colloidal 

  

 

 

Welcome to the information obtained from the sample to facilitate you yo test the adhesive properties,to make the right purchasing decisions to save money!