chemical polyurethane solution(Direct factory)

Specifications

1.The adhesive ratio 100:25
2.Good sealing .
3.Attend auto exhibition
4.Best for air filter
5.Shore A as your requirement

 

Two-component polyurethane adhesive for machine component proportion ratio is 100:25
	Material-A	Material-B
Weight	Small barrel :25KG	6.25KG
	Big barrel :50KG	12.5KG
Physical nature	orange-red viscous liquid (color based on your request to configure)	brown-yellow liquid
viscosity	800-1000MPa.S(25°C)	25-50MPa.S(25°C)
density	1.02g/ml	1.02g/ml
package	Plastic bucket or Tin bucket	Plastic bucket ,Tin bucket, Plastic pots
storage	1. Material-A and material-B can store up 3-6 months.
	2. To appropriate indoor storage above 15°C

 

 

Usage:

1.The material must be full rocked after each to the plastic injection machine plastic injection so that the A material mixing evenly.

1.Everytime the plastic injection machine plastic injection A material must be full before the shaking in order to the   material until

2.AB material proportioning ratio of A:B=100:25 or 4:1.28°C,you can start operation

3.Material temperature controlled 24°C-28°C appropriate then you can start operation.

4. Must be clean before using the mould release agent (Note:

The new plastic mould can be wiped free)

5 .If A and B is not reaction please measuring A and B ratio.

6. A and B must be sealed to .To avoid the air and water vapor reaction, as a result affecting the effect of colloidal

 

 

 

Anping sanlian filtering equipment Co.,LTD

Http://cnfilteradhesive.en.china.cn 

Address:  Hebei Province Anping County, Hengshui City, Hebei Filter City

 

Welcome to the information obtained from the sample to facilitate you yo test the adhesive properties,to make the right purchasing decisions to save money