Home > Products > Polyurethane Adhesive > adhesive polyurethane foam(manufacturer)
adhesive polyurethane foam(manufacturer)
- 5 Ton / Tons per Month
- Tianjin Port
- T/T
- multi- purpose rubber plane best paint sealant for black cars
- modified starch good price
- anti-fungus silisone sealant for sanitary usage as bath and kitchen
- NFION NF150-200GZ Customized Thermal Conductivity 1.0- 7.0W/m.k Gray Silicone Thermal Paste Compound Grease
- NFION NF150-450S 4.5W/m.k Thermal Conductivity4.5 w/m -k Thermal insulation silicone soft pad thermal cooling gap pad for heat-sink GPU thermal pad silicone
- Yuru Bridge Expansion Joint Concrete Crack Repairing Polyurethane Sealant
Product Details
CAS No.: | 9009-54-5 | Other Names: | polyurethane | MF: | 210-898-8 |
EINECS No.: | C3H8N2O | Place of Origin: | Hebei, China | Classification: | Double Components Adhesives |
Main Raw Material: | Polyurethane | Usage: | Other, adhesive for filter | Brand Name: | JASL |
Model Number: | 100:25 |
Product Description
Specifications
1.two parts the ratio 4:12.used for the air filter
3.good quality,reasonable price
4.attend the auto exhibition
5.ISO9001
Two component polyurethane adhesive for air filter, the component ratio is 100:25
Machine adhesive
Physical nature:
Color: part-A: orange-red (color as your request)
Part-B: brown-yellow
Physical form: viscous liquid (sticky liquid)
Viscosity: part-A: 800-1000MPa.s (25°C)
Part-B: 25-50MPa.s (25°C)
Density: part-A 1.02g/ml
Part-B 1.27g/ml
Instructions:
1. Material-A should be stirred or shaked well when you injected it into the machine.
2. Material-A and material-B are mixed at the mixture ratio 100:25
3. The material’s work temperature should be controlled 24°C-28°C then you can start operation
4. Brushing the mould with release agent before using the mould (notice: the new plastic mould can be wiped free)
5. If the response is inadequate, please measure the ratio
6. Material-A and material-B must be sealed to store. Or they can react with air or water, affect using effects.
Notes:
1. Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water
in air and affect using effects.
2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature.
3. EXP: 6 months
4. Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the
adhesive.
Features | Part-A | Part-B |
Ingredients | Polyether polyols | MDI |
Color | As your request | Brown-yellow |
Viscosity (25°C) | 800-1000MPa.s | 25-50MPa.s |
Density | 1.02g/ml | 1.27g/ml |
Physical form | Viscous liquid (sticky liquid) | |
EXP | 6 months | |
Application | Injection automobile air filter end cover | |
Package | Export standard seaworthy packing | |
Hardness | Shore A | |
notes | 1. Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects. | |
2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature. | ||
3. Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the adhesive. |
If you are interested in this products,pls contact me at freely!
Tel:86-318-7850507
Free sample will be sent to you for your evaluation!
Contact Us
- Anping County Sanlian Filtering Equipment Co., Ltd.
- Contact nameSteven Li
- Phone86-0318-7850508
- AddressNo. 3, Hebei Filter Material City, (Nanzhangwo Village) Chengdong Development Zone, Anping County
Filter Machinery | Filter Paper | Filters | Metal Machinery |
New Products | One Component Filter Adhesive | Other Adhesives | Other Filter Materials |
Polyurethane Adhesive | Two Component Filter Adhesive | Wire Mesh |
- Structural Double Component Adhesive Silicone Sealant For Glass Insulating
- Deherman Waterproof Caulk & Seal 100% Silicone Sealant Neutral-Cure Silicone Sealant for 2-Sided Structural Glazing
- Hot selling high quality animal glue printing packaging glue medium instant hot melt jelly glue for automatic machine
- Chinese famous supplier wholesale price hot melt adhesive slow drying speed glue sinstar jelly glue for folder making
- technical support available hot melt adhesive technical gelatin glue jelly sticker glue for rigid box manufacturer
- high quality hot melt adhesive medium drying speed glue jelly glue manufacturing process for cellphone box
- strong viscosity hot melt adhesive medium drying speed glue jelly sticker glue for mobile photo case
- Wholesale price hot melt adhesive book binding automatic machine sinstar jelly glue for rigid box
- NFION NF150-500N High performance materials insulation thermal interface material Gel Thermal Grease for PCB computer
- NFION NF150-500GZ 5.0W/m.k Silicone Putty/Gel/Grease/Paste for Gap Filling Insulation Materials & Elements
- Hydroxy ethyl cellulose
- MHEC
- Hydroxypropyl methyl cellulose
- Shoe insole with hot melt adhesive bonding firm not open glue high temperature manufacturers of direct sales
- Road grouting glue cement road expansion joint repair glue crack plugging roof asphalt tarmac grouting glue
- NFION NF150-400N 4W High Performance Materials Insulation Thermal Interface Material Gel Thermal Grease For Pcb Computer
- NFION NF150-400NJ Two Part Thermal Gel Materials Liquid Gap Fillers 4W
- One component polyurethane sealant expands with water sealing adhesive building subway construction joint polysulfide sealant
- NFION NF150-200N thermal conductive Clay 1W 2W 3W 4W 5W High Thermal Conductivity Silicone Thermal Putty
- NFION NF150-800 thermal conductive pad conductivity 8W/m.K for LED light CPU
- NFION NF150-600GZ 6WHigh Thermal Conductivity Silicone Grease For LED And CPU Heat Sink
- NFION NF150-300NJ Two-part Component Thermal Gel 3W/m.k Two Part Thermal Gel Materials Liquid Gap Fillers
- NFION NF150-400N 4.0W One-Part Thermal Conductive Gel One Component Thermally Conductive Gel For Filling Large Gap
- NFION NF150-700 Thermal Conductive Silicone Insulation Pad 7W thermal conductive sheet thermal gap filler pad
Popular Searches
Recommended Products
- Titanium Dioxide TiO2 Powder Pigment for Paint Raw Material CAS 13463-67-7
- PFA vial cleaning system, supporting bracket, can clean 7/15/22/30ml vials
- Chameleon pearl pigment for car painting and cosmetic
- Teflon PFA beaker, withstand high temperature of 260℃, used with anti-corrosion hot plate
- NFION NF150-200GZ Customized Thermal Conductivity 1.0- 7.0W/m.k Gray Silicone Thermal Paste Compound Grease
- NFION NF150-450S 4.5W/m.k Thermal Conductivity4.5 w/m -k Thermal insulation silicone soft pad thermal cooling gap pad for heat-sink GPU thermal pad silicone
- Iron Oxide Red And Yellow Re2O3 Factory Pigment
- SMS-5H2O detergent usage Sodium metasilicate CAS 6834-92-0
- tablet capsule automatic visual inspection machine
- Injections and Implanted Drug Products (Parenterals)—Product Quality Tests
- lyophilized powders ,vial , glass ampoule visual inspection machine
- automatic visual inspection machine
Find Similar Products By Category
- Chemicals > Adhesives & Sealants
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Steven Li
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-